多线地面激光扫描仪误差分析及自标定

详细信息    查看全文 | 推荐本文 |

英文篇名：Error Analysis and Self-Calibration of the Multi-Line Terrestrial Laser Scanner 作者：闫利 ; 董孟源 ; 刘云波 ; 陈长军 ; 刘华 英文作者：YAN Li;DONG Mengyuan;LIU Yunbo;CHEN Changjun;LIU Hua;School of Geodesy and Geomatics, Wuhan University;The Institution of Geological Surveying and Mapping; 关键词：三维激光扫描 ; VLP-16 ; 误差分析 ; 系统误差 ; 自标定 ; 均方根误差 英文关键词：3D laser scanning;;VLP-16;;error analysis;;systematic errors;;self-calibration;;root mean square error 中文刊名：测绘地理信息 英文刊名：Journal of Geomatics 机构：武汉大学测绘学院;浙江省测绘大队; 出版日期：2019-09-27 出版单位：测绘地理信息 年：2019 期：05 基金：国家自然科学基金资助(41771486);; 国家重点研发计划(2016YFC0802509-1) 语种：中文; 页：5-11 页数：7 CN：42-1840/P ISSN：2095-6045 分类号：P225.2

摘要

针对多线地面激光扫描仪因系统误差而影响点云数据精度的问题,从其构造及其工作原理出发,详细分析了多线扫描仪的误差来源,并采用基于平面约束的非线性最小二乘静态自标定模型对仪器的系统误差进行标定。以多线扫描仪VLP-16为例,分别进行了自标定的模拟实验及实测验证。实验结果表明,经过本文方法标定,扫描仪所采集的点云到约束平面距离范围缩小为-2～2 cm。相对于厂家的标称精度3 cm,精度提高了30%以上。此外,本文方法使得标定后整体估计的RMSE提高了20%～30%。
        To solve the problem of the low accuracy of the multi-line terrestrial laser scanner(TLS) point cloud due to the system errors, this paper analyzes the main sources of instrument system errors in detail based on the working principles and the structure of the multi-line TLS. A planar feature based nonlinear least squares static adjustment approach is used for self-calibration. The multi-line scanner VLP-16 is taken as an example for both the simulation experiments and the real experiments. The experiments results show that the range of the distance from points to the constraint plane is narrow from-2 to 2 cm, and the accuracy of the distance is increased by more than 30% over the standard factory 3 cm by the approach. Furthermore, the methods in this paper make the planar misclosure residual RMSE increased by 20% to 30% after calibration.

引文

[1] Toth C,Józków G.Remote Sensing Platforms and Sensors:A survey[J].ISPRS Journal of Photogrammetry & Remote Sensing,2016,115:22-36
    [2] 袁长征,滕德贵,胡波,等.三维激光扫描技术在地铁隧道变形监测中的应用[J].测绘通报,2017(9):160-161
    [3] 赵峻松,尹志春,朱文战,等.激光扫描仪在动车组开闭罩外形曲面检测中的应用[J].广东科技,2017(4):83-85
    [4] Laefer D F,Truong-Hong L,Carr H,et al.Crack Detection Limits in Unit Based Masonry with Terrestrial Laser Scanning[J].NDT&E International,2014,62(2):66-76
    [5] Lichti D D.Terrestrial Laser Scanner Self-Calibration:Correlation Sources and Their Mitigation[J].ISPRS Journal of Photogrammetry and Remote Sensing,2010,65(1):93-102
    [6] Lichti D D.Error Modelling,Calibration and Analysis of an AM-CW Terrestrial Laser Scanner System[J].ISPRS Journal of Photogrammetry and Remote Sensing,2007,61(5):307-324
    [7] Rietdorf A,Gielsdorf F,Gruendig L.A Concept for the Calibration of Terrestrial Laser Scanners[C].Proceedings FIG Working Week (on CD-ROM),International Federation of Surveyors,Athens,Greece,2004
    [8] Chan T O,Lichti D D.Automatic in Situ Calibration of a Spinning Beam LiDAR System in Static and Kinematic Modes[J].Remote Sensing,2015,7(8):10 480-10 500
    [9] 官云兰,程效军,詹新武,等.地面三维激光扫描仪系统误差标定[J].测绘学报,2014,43(7):731-738
    [10] Chow J C K,Lichti D D,Glennie C.Point-Based Versus Plane-Based Self-Calibration of Static Terrestrial Laser Scanners[J].International Archives of the Photogrammetry,Remote Sensing and Spatial Information Sciences,2011,38(5/12):121-126
    [11] Glennie C,Lichti D D.Static Calibration and Analysis of the Velodyne HDL-64E S2 for High Accuracy Mobile Scanning[J].Remote Sensing,2010,2(6):1 610-1 624
    [12] Lichti D D.A Review of Geometric Models and Self-Calibration Methods for Terrestrial Laser Scanners[J].Boletim de Ciencias Geodesicas,2010,16(1):3-19
    [13] 刘春阳.三维坐标转换的Gauss-Helmert模型及其抗差解法[D].合肥:安徽理工大学,2016
    [14] 刘超,王彬,赵兴旺,等.三维坐标转换的高斯-赫尔默特模型及其抗差解法[J].武汉大学学报·信息科学版,2018,43(9):1 320-1 327
    [15] 刘春阳,刘超.三维坐标转换的非线性Gauss-Helmert模型及其解法[J].测绘科学,2017(5):122-127
    [16] 曾文宪,陶本藻.三维坐标转换的非线性模型[J].武汉大学学报·信息科学版,2003,28(5):566-568
    [17] 邱德超,鲁铁定.基于Partial EIV模型的三维坐标转换参数求解方法[J].江西科学,2017(3):355-359
    [18] 王东阁,邱卫宁,王刘准,等.基于partial-EIV模型的WTLS算法在三维坐标变换中的应用[J].测绘地理信息,2015,40(5):8-12