摘要
阐述了国内外主要的固定源PM_(2.5)的标准测试方法及测试仪器,并对实测结果进行了对比及分析,测定金属板式湿式电除尘器PM_(2.5)质量浓度的排放范围是0.4~4.6mg/m~3,导电玻璃钢湿式电除尘器是0.2~3.4mg/m~3。
This paper expounds the standard testing methods and testing instruments of the main fixed source of PM_(2.5) abroad and at home, and compares and analyzes the actual test result. The emission ranges of PM_(2.5) mass concentration from the metal plate WESP are 0.4~4.6 mg/m~3, the fiberglass-reinforced plastics(FRP) of electric conduction of WESP are 0.2~3.4 mg/m~3.
引文
[1]姚宇平,刘含笑,朱少平.燃煤电厂低浓度烟尘测试方法探讨[J].环境工程,2015(10):139-142.
[2]刘含笑,姚宇平,郦建国,等.超低排放下低浓度可过滤颗粒物的手工测试[J].中国粉体技术,2017,23(4):50-54.
[3]刘含笑,姚宇平,郦建国.燃煤电厂低浓度颗粒物测试的空白实验研究[J].中国电力,2017,50(7):115-121.
[4]Li Jianguo,Yao Yuping,Li Weidong,et.The Research on Co-benefit Control Technical Route of Flue Gas“Ultra-clean Emission”for Coal-fired Power Plants[C].8th i-CIPEC.Hangzhou.2014.
[5]中国环境保护产业协会电除尘委员会.燃煤电厂烟气超低排放技术[M].北京:中国电力出版社,2015.
[6]Chen Zhaomei,Sun Zhenzhen,Liu Hanxiao,et.Application of WESP in Coal-fired Power Plants for“Ultra-clean Emission”[C].8th i-CIPEC.Hangzhou.2014.
[7]刘含笑,朱少平,姚宇平,等.PM2.5重量法现场测量技术研究[J].电力与能源,2014,35(5):572-575.
[8]刘含笑,姚宇平,郦建国,等.燃煤电厂PM2.5测试方法研究[J].电力与能源,2018,39(2):101-106.
[9]刘含笑,郦建国,姚宇平,等.较高负压烟气环境下PM2.5测试技术研究[J].中国粉体技术,2017,23(2):79-83.
[10]刘含笑,姚宇平,郦建国,等.PM2.5测试方法对比及其燃煤电厂排放特征分析[J].中国粉体技术,2017,23(5):34-39.
[11]刘含笑,朱少平,姚宇平,等.电荷法测试WESP进出口烟气中PM2.5的试验研究[J].中国电力,2014,47(12):37-41.
[12]刘含笑,姚宇平,郦建国,等.燃煤电厂WESP颗粒物脱除机制及排放特征研究[J].中国电力,2017,50(12):178-184.
[13]刘含笑,姚宇平,郦建国,等.一种集成式P M2.5采样枪:中国,201710049662.1[P].2017-06-09.