ABS装置掺混单元的模头尾气治理

详细信息    查看全文 | 推荐本文 |

英文篇名：Die vent gas treatment of the ABS compounding area 作者：徐宁 ; 张琦 ; 陈伟峰 ; 董文慧 ; 刘世哲 ; 张东伟 ; 袁洪波 英文作者：XU Ning;ZHANG Qi;CHEN Wei-feng;DONG Wen-hui;LIU Shi-zhe;ZHANG Dong-wei;YUAN Hong-bo;Tianjin Dagu Chemical CO.,LTD.; 关键词：ABS ; 掺混 ; 模头尾气 ; 环保 ; 活性碳吸附 英文关键词：ABS;;compounding area;;die vent gases;;environmental protection;;activated carbon adsorption 中文刊名：天津化工 英文刊名：Tianjin Chemical Industry 机构：天津大沽化工股份有限公司; 出版日期：2019-07-30 出版单位：天津化工 年：2019 期：04 语种：中文; 页：46-49 页数：4 CN：12-1201/TQ ISSN：1008-1267 分类号：X701

摘要

ABS掺混单元在生产过程中产生的模头尾气,主要成分为苯乙烯、丙烯腈、甲苯、乙苯、异丙苯、正丙苯、苯甲醛、甲基丙烯酸甲酯等,也包含油类物质。在当前尾气治理行业中,尾气的治理通常使用焚烧,但掺混模头尾气VOCs浓度较低,直接焚烧会消耗过多的天然气等能源,因此本项目采用高压静电除油烟、光催化及颗粒碳再生吸附的方法,进行组合处理。其中的关键技术点主要包括3个方面,分别是除尘、除油,光催化和物理吸附。
        The die vent gases produced by the ABS compounding area during the production process is mainly composed of styrene, acrylonitrile, toluene, ethylbenzene, methyl methacrylate, etc., and also contains oily substances. In the current VOCs treatment industry, the treatment of die vent gases is usually incinerated, but the concentration of VOCs in the die vent gases is low, and direct incineration consumes too much energy such as natural gas. Therefore, to solve this problem,a composite gases purification method was used by high-voltage electrostatic degreasing, photocatalysis and activated carbon adsorption. The key technical points include three aspects, namely dust removal, degreasing, photocatalysis and physical adsorption.

引文