用户名: 密码: 验证码:
GNSS卫星中频信号采集器的设计与实现
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
近年来,基于全球卫星定位系统的各类应用在全球范围内快速发展。美国GPS,欧洲Galileo和俄罗斯的GLONASS蓬勃发展,卫星的兼容性和互操作性成为当今最流行议题。伴随着我国自主的“北斗一号卫星定位导航系统”的建成,标志着我国成为世界上第三个拥有自主知识产权卫星定位系统的国家,体现了我国科技水平和经济实力,推进了信息基础设施建设,提高了经济社会和军事信息化的水平。
     本论文所设计的GNSS卫星中频信号采集器在这样的背景下提出,为多星座兼容的卫星信号采集提出了一种良好的解决方案,并提出了多兼容、低功耗、高性能和可扩展的设计原则。
     本论文主要讨论GNSS卫星中频信号采集器的软硬件设计与实现。首先介绍了GNSS卫星中频信号采集器功能要求和设计指标,针对卫星信号采集的特定应用选择适当的系统架构与传输方式。然后对硬件系统的各主要功能模块的设计方法及实现都进行详尽讨论,并且详细介绍软件系统设计和整个系统的后期测试,对出现的问题进行分析,并提出了有效的改进意见。
     通过系统调试验证设计的各项功能,试验的结果表明,本设计基本实现了卫星信号采集的各项要求。
In recent years, various types of applications based on global satellite positioning system are developing rapidly. The U.S. GPS, European Galileo and Russia's GLONASS are booming. Satellite compatibility and interoperability become the most popular issues nowadays. Along with China's Beidou satellite positioning and navigation system established, China has become the world's first three countries with independent intellectual property rights in global satellite positioning, showing the level of national science, technology and economic strength.
     The GNSS satellite IF signal collector is designed under such background and this paper will present a good solution for multi-constellation satellite signal collection. The paper has followed a multi-compatible, low-power, high performance and scalability of the design principles.
     This paper focuses on GNSS satellite IF signal collector hardware and software design and implementation. First, the paper introduced collector functional requirements and design specifications by chosen system architechture and transmition mode, and then carried out a detailed description of overall design and main modules functional design. Lastly, this paper gave detailed test methods and an effective improvement.
     Through the system debug, results show that the design has achieved the requirements of GNSS satellite signal collection and perform well.
引文
[1]罗鸣,曹冲,肖雄兵等译,全球定位系统——信号、测量与性能(第二版).电子工业出版社,2008.4
    [2]王浩.计算机USB接口技术研究.西安电子科技大学
    [3]龙玲,许海清.USB2.0微控制器CY7C68013的GPIF接口设计.微控制器与嵌入式系统.2006年第10期
    [4]宁蕴绯,张宇翔,郭敏.基于USB总线接口的数据采集系统.微计算机信息.2008年第24卷第6-1期
    [5]张建勇,张刚,程永强.基于U盘应用的USB2.0设备控制器的设计.太原理工大学学报.2008年5月第39卷
    [6]HZG07V2产品说明书V1.中科微电子有限公司,2007
    [7]钱峰.EZ-USB FX2单片机原理、编程及应用.北京航空航天大学出版社,2003.6
    [8]Cyclone III Device Handbook, Volume 1. ALTERA Corp,2007.3
    [9]Quartus II Version 7.2 Handbook. ALTERA Corp,2007.10
    [10]Cyclone(?) III EP3C25 Device Pin-Out. ALTERA Corp,2008
    [11]TPS54310PWP. Texas Instruments Corp,2002
    [12]TPS79501DCQ. Texas Instruments Corp,2002
    [13]Serial Configuration Devices (EPCS1, EPCS4,EPCS16 & EPCS64) Data Sheet. ALTERA Corp,2004.7
    [14]王守三.PCB的电磁兼容设计技术、技巧和工艺.机械工业出版社,2008
    [15]江思敏,唐广芝.PCB和电磁兼容设计.电子工业出版社,2004
    [16]CY7C68013A. Cypress Semiconductor Corporation,2005
    [17]EZ-USB Manual Technical Reference. Cypress Semiconductor Corporation,2005
    [18]萧世文.USB2.0硬件设计.清华大学出版社,2002
    [19]刘福奇.FPGA嵌入式项目开发实战.电子工业出版社,2009.4
    [20]王诚,吴继华,范丽珍等.Altera FPGA/CPLD设计.人民邮电出版社,2008
    [21]王伟.VerilogHDL程序设计与应用.人民邮电出版社,2005
    [22]ModelSim(?) SE Reference Manual. Mentor Graphics Corporation,2006.11
    [23]ModelSim(?) SE Tutorial. Mentor Graphics Corporation,2006.11
    [24]Quartus II Version 7.2 Handbook. ALTERA Corp,2007.10
    [25]侯俊杰泽.C++ Primer中文版,1999
    [26]武安河.Windows设备驱动程序WDF开发.电子工业出版社,2009.1
    [27]Cypress CyAPI Programmer's Reference. Cypress Semiconductor Corporation.
    [28]黄志伟.GPS接收机电路设计.国防工业出版社,2005.6
    [29]寇艳红译.GPS原理与应用.2007.1
    [30]王伟,徐定杰.基于FFT的伪码快速捕获.哈尔滨工程大学学报,2003年12月第24卷第6期
    [31]周开基.电磁兼容性原理.哈尔滨工程大学出版社,2005

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700