用户名: 密码: 验证码:
Power and Rate Control for Wireless Communication Networks Based on Priority of Quality-of-Service
详细信息    查看官网全文
摘要
Existing power and rate control methods for wireless communication networks aim to maximize the system capacity and the network throughput, and attempt to increase the quality-of-service(QoS), but cannot guarantee the QoS. This paper presents a new power and rate control method for wireless communication networks, which is based on the priority of QoS, so the QoS can be guaranteed. A dual closed-loop power and rate controller is designed. The transmission rate is controlled by the outer loop, the target transmission rate is obtained(thus the optimal target signal-to-inference ratio(SIR) can relatively be determined) based on the priority of QoS. According to the target SIR, the transmit power is controlled by the inner loop to make the actual SIR track the target one. Simulation results show that the proposed power and rate control method has good control performance.
Existing power and rate control methods for wireless communication networks aim to maximize the system capacity and the network throughput, and attempt to increase the quality-of-service(QoS), but cannot guarantee the QoS. This paper presents a new power and rate control method for wireless communication networks, which is based on the priority of QoS, so the QoS can be guaranteed. A dual closed-loop power and rate controller is designed. The transmission rate is controlled by the outer loop, the target transmission rate is obtained(thus the optimal target signal-to-inference ratio(SIR) can relatively be determined) based on the priority of QoS. According to the target SIR, the transmit power is controlled by the inner loop to make the actual SIR track the target one. Simulation results show that the proposed power and rate control method has good control performance.
引文
[1]J.Tang and X.Zhang,Quality-of-service driven power and rate adaptation over wireless links,IEEE Trans.Wireless Commun.,6(8):3058-3068,2007.
    [2]A.Subramanian and A.H.Sayed,A robust power and rate control method for state-delayed wireless networks,Automatica,41:1917-1924,2005.
    [3]A.Subramanian and A.H.Sayed,Joint rate and power control algorithms for wireless networks,IEEE Trans.on Signal Processing,53(1):4204-4214,2005.
    [4]S.L.Kong,H.S.Zhang,Z.S.Zhang and C.H.Zhang,Joint predictive control of power and rate for wireless networks,Acta Automatica Sinica,33(7):761-764,2007.
    [5]L.Zhao and J.W.Mark,Joint rate and power adaptation for radio resource management in uplink wideband code division multiple access systems,IET Communications,2(4):562–572,2008.
    [6]Y.L.Chen,Y.S.Lin,J.W.Wang,and J.H.Wen,Adaptive fuzzy-based rate management and power control in multimedia CDMA cellular systems,Computer Communications,31:1901-1910,2008.
    [7]A.Moller and U.T.Jonsson,Stability of rate and power control algorithms in wireless cellular networks,in Proceedings of Joint 50th IEEE Conference on Decision and Control and European Control Conference,2011:4535-4541.
    [8]A.Ahmad,N.UI Hassan,M.Assaad,and H.Tembine,Joint power control and rate adaptation for video streaming in wireless networks with time-varying interference,IEEE Trans.Vehicular Technology,65(8):6315-6329,2016.
    [9]C.Han,D.Sun,X.Li,L.Liu,Y.Shi,Z.Li,Robust H power and rate control for uncertain wireless networks with time-varying state and input delays,in Proceedings of the19th World Congress of the International Federation of Automatic Control,2014:9721-9726.
    [10]C.Han,D.Sun,S.Bi,L.Liu and Z.Li,Modeling and model predictive power and rate control of wireless communication networks,Journal of Applied Mathematics,Article ID642673,10 pages,http://dx.doi.org/10.1155/2014/642673,2014.
    [11]D.Z.Zheng,Linear System Theory,Tsinghua University Press,Beijing,China 2010.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700