用户名: 密码: 验证码:
基于虚拟仪器和PCI总线的数据收发系统
详细信息    查看官网全文
摘要
在飞机设计研发工作中,测试数据的采集与存储是一项十分重要的工作,而采用虚拟仪器技术可以十分方便地对数据进行运算和管理,提高了测试系统的灵活性,并扩大了适用范围。介绍了一种采用虚拟仪器技术实现的数据收发系统,本系统通过PCI总线接口连接PC和底层硬件模块,在PC机内可以运用LabWindows/CVI环境编写虚拟仪器软件。通过这种方法可以在不改变硬件测试板卡的情况下实现不同的测试功能,方便测试工作的同时,降低测试成本。
In the aircraft design and development working,test data acquisition and storage is a very important work.Using virtual instrument technology makes data operation and management very convenient,which improves the flexibility of the testing system,and expands the scope of application.A data transceiver system is realized by virtual instrument technology,PC and underlying hardware module are connected through PCI bus,and the virtual instrument software is compiled at LabWindows/CVI environment.By this method,different test function can be achieved without changing the hardware test card,and the test work will be convenient while the cost is reduced.
引文
[1]王高云,杨江平,沈忠义.基于LabWindows/CVI的多信号源开发设计[J].仪表技术,2007(8):8-9.
    [2]Katayama T,Oka I,Ata S.Modulation identification by general orthogonal modulations[C]//IEEE International Conference on Advanced Technologies for Communications.IEEE,2008:12-15.
    [3]隋佳彬.基于DSP的数字传输系统的PCI上位机WinDriver驱动设计与研究[D].北京:北京理工大学,2014.
    [4]郭雅萌,杨世凤,王建新.LabWindows/CVI与PCI数据采集卡通信技术研究[J].电子测量技术,2007,30(5).
    [5]郝建华,江修富,许斌.正交调制解调算法在软件无线电中的应用[J].航空电子技术,2005,36(2):6-9.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700