LiMn_2O_4/Li_(1.3)Al_(0.3)Ti_(1.7)(PO_4)_3复合正极材料的制备及性能

详细信息    查看全文 | 推荐本文 |

英文篇名：Preparation and characterization of LiMn_2O_4/Li_(1.3)Al_(0.3)Ti_(1.7)(PO_4)_3 composite cathode materials 作者：王镇江 ; 常清泉 ; 韩迪 ; 梁兴华 ; 赵玉超 英文作者：WANG Zhen-jiang;CHANG Qing-quan;HAN Di;LIANG Xing-hua;ZHAO Yu-chao;Guangxi Key Laboratory of Auto Parts and Vehicle Technology, Guangxi University of Science and Technology;Guangdong Academy of Sciences Institute of New Materials; 关键词：Li ; Mn2O4 ; Li1.3Al0.3Ti1.7(PO4)3 ; 复合电极 ; 电化学性能 英文关键词：LiMn2O4;;Li1.3Al0.3Ti1.7(PO4)3;;composite material;;electrochemical properties 中文刊名：DYJS 英文刊名：Chinese Journal of Power Sources 机构：广西科技大学广西汽车零部件与整车技术重点实验室;广东省新材料研究所; 出版日期：2019-02-20 出版单位：电源技术 年：2019 期：v.43;No.341 基金：广西汽车零部件与整车技术重点实验室自主研究课题(2017GKLACVTZZ04);; 广西科技大学研究生教育创新计划项目(YCS W2018202);; 广东省科学院实施创新驱动发展能力建设专项资金项目(2017GDAS CX-0202);; 广西新能源物流商用车协同创新研发及成果转化应用(2018AA18028Y) 语种：中文; 页：DYJS201902003 页数：3 CN：02 ISSN：12-1126/TM 分类号：18-20

摘要

采用高温固相法分别制备Li Mn_2O_4和Li_(1.3)Al_(0.3)Ti_(1.7)(P O_4)_3材料,分别以质量比8∶2和6∶4不同比例复合做正极材料,利用X射线衍射仪(XRD)和扫描电子显微镜(SEM)进行表征测试,恒流充放电、循环伏安法和电化学工作站研究其电化学性能,综合研究材料的性能。结果表明:质量比8∶2的样品颗粒分布比较均匀,边界清晰。通过电化学性能测试得出8∶2的样品首次冲放电效率可达到93.58%,纯的Li Mn_2O_4电极中样品的氧化还原峰更尖锐,电极反应速率快,氧化还原性能更好,纯的Li Mn_2O_4在0.1 C下循环50次后比容量保持率为90.3%。
        The spinel lithium manganese oxide(LiMn2 O4) and Li1.3 Al0.3 Ti1.7(PO4)3 materials were synthesized by high temperature solid phase method respectively. The positive electrode materials were prepared by different 8∶2 and6∶4 mass ratios. The samples were characterized by X-ray diffraction(XRD) and scanning electron microscopy(SEM), constant current charge and discharge, cyclic voltammetry and electrochemical workstations to study their electrochemical properties and to comprehensively study the properties of materials. The results indicate that the distribution of 8∶2 particles is uniform and the boundary is clear. The redox peak of pure LiMn2 O4 electrode is sharper, the electrode reaction rate is faster, the redox performance is better, and the specific capacity retention rate of the pure LiMn2 O4 is 90.3% at 0.1 C after 50 cycles.

引文

[1] CHEN R,ZHAO T,ZHANG X. Advanced cathode materials forlithium-ion batteries using nanoarchitectonics[J]. Nanoscale Hori-zons,2016(1):423-444.
    [2] CHOI N S,CHEN Z,FREUNBERGER D S A,et al. Lithium batte-rien und elektrische doppelschichtkondensatoren:aktuelle heraus-forderungen[J]. Angewandte Chemie,2012,124(40):10134-10166.
    [3] MAO F,GUO W,MA J. Research progress on design strategies,synthesis and performance of LiMn2O4-based cathodes[J]. Rsc Ad-vances,2015,127(5):105248-105258.
    [4] LEE S,CHO Y,SONGO H K,et al. Carbon-coated single-crystalLiMn2O4nanoparticle clusters as cathode material for high-energyand high-power lithium-ion batteries[J].Angewandte Chemie,2012,51(35):8748-8752.
    [5] XU G,LIU Z,ZHANG C,et al. Strategies for improving the cycla-bility and thermo-stability of LiMn2O4-based batteries at elevatedtemperatures[J]. Journal of Materials Chemistry A,2015,3(8):4092-4123.
    [6] PARK O K,CHO Y,LEE S,et al. Who will drive electric vehicles,olivine or spinel?[J]. Energy&Environmental Science,2011,4(5):1621-1633.
    [7]何向明,姜长印,张国昀,等.表相掺杂Cr的尖晶石锰酸锂的高温电化学性能[J].云南大学学报:自然科学版,2005(S3):418-420.
    [8]李薛勇.尖晶石锰酸锂制备及其电化学性能的研究[J].新疆有色金属,2011,34(4):50-51.
    [9] LIU Q,YU L,WANG H. Preparation of LiMn2O4, with an en-hanced performance by mixed liquid and mechanical activations[J].Journal of Alloys&Compounds,2009,486(1):886-889.
    [10] GUO Z P,KONSTANTINOV K,WANG G X,et al. Preparationof orthorhombic LiMnO2,material via the sol-gel process[J]. Jour-nal of Power Sources,2003,119:221-225.