摘要
随着国际工程的大型化发展,对短路电流计算要求更具有精确性和科学性。本文介绍了目前国内短路电流计算的两种方法,IEC60909(GB/T 15544)标准和传统实用短路电流计算方法,比较了两种方法的概念、算法以及初始条件设置等方面的区别,为国际工程项目短路电流计算方法的选择应用提供参考。
引文
[1]王寓,王主丁,张宗益,等(Wang Yu,Wang Zhuding,Zhang Zongyi,et al).国内外常用短路电流计算标准和方法的比较研究(Comparison and research on the commonly used standards and methods of short-circuit current calculation)[J].电力系统保护与控制(Power System Protection and Control),2010,20(38):148-152.
[2]周益三(Zhou Yisan).IEC三相交流系统短路电流计算的使用(Calculating the short circuit current of a three-phase alternating current system with IECmethod)[J].氮肥设计(Technology of Nitrogen Fertilizers),1994,32(3):8-13.
[3]李光琦(Li Gangqi).电力系统暂态分析(Power system transient analysis)[M].二版.北京:中国电力出版社(Second edition.Beijing:China Electric Power Press),1995.
[4]中国航空规划设计研究总院有限公司(China aviation planning and design institute co.,ltd.).工业与民用供配电设计手册(Industrial and civilian power supply and distribution design manual.)[M].四版.北京:中国电力出版社(Fourth edition.Beijing:China Electric Power Press),2016.
[5]侯剑芸(Hou Jianyun).短路电流IEC算法与实用算法的异同(Difference between IEC algorithm and practical algorithm of short circuit current)[J].电力建设(Electric Power Construction)1997(3):29-31.