用户名: 密码: 验证码:
短时加热条件下TC4合金β相长大动力学研究
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Study on Kinetics of β Phase Grain Growth of TC4 Alloy under Short Time Heating
  • 作者:赵敏剑 ; 邵晖 ; 白力静 ; 王凯旋
  • 英文作者:ZHAO Minjian;SHAO Hui;BAI Lijing;WANG Kaixuan;College of Materials, Xi'an University of Technology;Western Superconducting Material Science and Technology Co., Ltd.;
  • 关键词:Ti-6Al-4V ; 短时加热 ; 晶粒长大动力学
  • 英文关键词:Ti-6Al-4V;;shrot time heating;;grain growth kinetics
  • 中文刊名:SJGY
  • 英文刊名:Hot Working Technology
  • 机构:西安理工大学材料学院;西部超导材料科技股份有限公司;
  • 出版日期:2019-02-03 07:06
  • 出版单位:热加工工艺
  • 年:2019
  • 期:v.48;No.504
  • 基金:国家青年自然科学基金资助项目(51501150);; 西安理工大学校基金项目(101-256211415)
  • 语种:中文;
  • 页:SJGY201902040
  • 页数:3
  • CN:02
  • ISSN:61-1133/TG
  • 分类号:167-169
摘要
通过Image-pro plus图像分析软件定量分析不同热处理温度和时间下的TC4合金β相含量和尺寸,获得了晶粒生长时间指数n和长大激活能Q。结果表明:随着加热温度和时间的增加,晶粒尺寸增大;β相生长时间指数n随温度的升高先增大后减小,长大激活能Q为95.28 kJ/mol。
        The β phase content and size of TC4 alloy under different heat treatment temperatures and time were quantitatively analyzed by Image-pro plus image analysis software. The grain growth time exponent n and the growth activation energy Q were obtained. The results show that, the grain size increases with the increase of heating temperature and time. The growth time exponent n of β phase first increases then decreases with the increase of temperature, and the activation energy Q is 95.28 kJ/mol.
引文
[1]刘莹,曲周德,王本贤.钛合金TC4的研究发展与应用[J].兵器材料科学与工程,2005,18(7):1-8.
    [2] Guerenu A M, Arizti F, Fuentes M D, et al.Recovery duringannealing in a cold rolled low carbon steel.Part 1:Kinetics andmicrostructural characterization[J].Acta Materialia,2004,52:3657-3664.
    [3]简明热处理手册编写组.简明热处理手册[M].北京:北京出版社,1985.
    [4] Gil F J, Planell J A.Behaviour of normal grain growth kinet-ics in single phase titanium and titanium alloys[D]. MaterialsScience and Engineering A,1952,283(1/2):17-24.
    [5]于腾,王磊,赵永庆,等.近β型高强钛合金Ti-26的β晶粒长大行为[J].郑州大学学报(工学版),2009,30(1):6-9.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700