摘要
为有效解决装备出现的问题,采用故障树分析法,对在调试中出现的扬弹机锁定机构曲柄断裂故障进行分析,找到造成故障的原因,绘制故障树,找出影响故障各原因之间的逻辑关系。通过定性分析和定量计算,确定故障树的最小割集,计算顶事件发生的概率和各割集发生的概率等参数,并分析各原因故障的影响程度。该研究可为高效解决故障提供依据。
In order to effectively solve the problems of equipment, the fault tree analysis method is used to analyze the crank fracture fault of the locker locking mechanism that appears in the commission. Find the cause of the failure, draw a fault tree, and find out the logical relationship between the causes of the failure. Through qualitative analysis and quantitative calculation, the minimum cut set of the fault tree is determined, the probability of occurrence of the top event and the probability of occurrence of each cut set are calculated, and the influence degree of each cause fault is analyzed.This research can provide a basis for efficient troubleshooting.
引文
[1]国防科工委军标出版发行部.国家军用标准可靠性(I)[M].北京:国防科工委军标出版发行部,1992:15-21.
[2]罗航.故障树分析的若干关键问题研究[D].成都:电子科技大学,2010.
[3]XING L,AMARI S V.Fault Tree Analysis[M].Handbook of Performability Engineering.Springer London,2008.
[4]陈宇毅.FTA故障树分析研究[D].北京:北京交通大学,2005.
[5]倪绍徐,张裕芳.基于故障树的智能故障诊断方法[J].上海交通大学学报,2008,42(8):1372-1375.
[6]胡隆基.基于故障树分析法的某型高炮随动系统故障诊断[J].四川兵工学报,2011,32(4):40-43.
[7]何庆飞,王汉功,陈小虎.故障树分析法在汽车起重机液压系统故障诊断中的应用[J].机床与液压,2014(2):196-198.
[8]郑裕国,张康达.故障树定性和定量计算的算法[J].浙江工业大学学报,1995(3):42-47.
[9]徐敬青,齐杏林,李宁.基于故障树的某型末制导炮弹控制舱故障分析[J].四川兵工学报,2008,29(3):25-27.
[10]安然,於孝春.空分主冷凝蒸发器爆炸的故障树分析[J].安全与环境学报,2011,11(3):164-165.