摘要
大尺寸位移测量分析系统作为关键测量设备,使用前必须经过系统标定,标定合格方可使用。目前,国内对整套系统的标定方法没有统一的规范,因此,本文对该系统标定方法进行了研究,提出了一种标定方法。结果表明,标定结果符合误差分析。该标定方法为摄影测量相关系统的标定提供了新思路。
As a main measurement instrument,the large size displacement measurement and analysis system must be calibrated before usage. Since there is no canonical criterion to be referenced presently,a calibration method is studied,which is to satisfy the measurement requirements. Several practical results show that the calibrated error accords with the theoretical error analysis. The proposed method provides a new viewpoint for the calibration of the photogrammetry system.
引文
[1]张清勇,郭永波.摄影位移测量技术在飞机静力试验中的应用[J].测控技术,2015,34(12):26-29.
[2]黄桂平.数字近景工业摄影测量关键技术研究与应用[D].天津大学,2005.
[3]GJB67. 9A-2008军用飞机结构强度规范第九部分:地面试验[S].
[4]于英,黄桂平.双目摄影测量中的精度分析与试验[J].计量技术,2009,(10):20-22.
[5]许丽,张之江.结构光测量系统的误差传递分析[J].光学精密工程,2009,17(2):306-313.
[6]中国飞机强度研究所.航空结构强度技术[M].北京:航空工业出版社,2013:45-49.
[7]张清勇.摄影测量系统误差分析[J].结构强度研究,2015,(2):36-38.