Ti和Fe连续驱动摩擦焊焊接界面宏观变形及微观形貌研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Research on Interface Macroscopic Deformation and Micromorphology of Ti/Fe Continuous Drive Friction Welding 作者：温国栋 英文作者：WEN Guodong;China Coal Technology Engineering Group Xi'an Research Institute; 关键词：连续驱动摩擦焊 ; 异种金属 ; 界面变形 ; 微观形貌 英文关键词：continuous drive friction welding;;dissimilar metal;;interface deformation;;micromorphology 中文刊名：SJGY 英文刊名：Hot Working Technology 机构：中煤科工集团西安研究院有限公司; 出版日期：2019-06-04 14:02 出版单位：热加工工艺 年：2019 期：v.48;No.513 基金：国家自然科学青年基金项目(NSFC 51705536);; 陕西省自然科学基础研究计划青年项目(2017JQ5070);; 中煤科工集团创新基金面上项目(2018MS010) 语种：中文; 页：SJGY201911007 页数：5 CN：11 ISSN：61-1133/TG 分类号：32-35+39

摘要

为了给钛/钢连续驱动摩擦焊制造提供理论支撑,采用钛和钢主体元素的纯钛和纯铁进行连续驱动摩擦焊试验,研究了焊接时间和摩擦压力对界面宏观变形和组织演变的影响规律。试验结果表明:随着摩擦压力的增大,界面宏观变形增大。随着焊接时间的增加,界面宏观变形变化不大。焊接界面两侧组织细化明显,Fe侧由细小的铁素体晶粒组成,Ti侧由细小的α晶粒组成。塑性层厚度随摩擦压力增加而增加,且近似为线性关系,焊接时间对塑性层厚度影响不大。
        In order to provide theoretical support for continuous drive friction welding manufacturing of titanium and steel, the continuous drive friction welding test of pure titanium and pure iron which are the main element of titanium alloy and steel was carried out. The effects of welding time and friction pressure on the macroscopic deformation and the microstructure evolution of the interface were studied. The results show that with the increase of the friction pressure, the interface macroscopic deformation increases. With the increase of welding time, the change of interface macroscopic deformation is not obvious. The microstructure at two sides of the welding interface is refined. The microstructure in the Fe side is composed of fine ferrite and the microstructure in the Ti side is composed of fine α grains. With the increase of the friction pressure, the thickness of plastic layers increases and the relationship between the thickness of plastic layer and friction pressure is approximately linear relation. In addition, the effect of welding time on the thickness of plastic layers is not obvious.

引文

[1] Shanmugarajan B, Padmananham G. Fusion welding studies using laser on Ti-ss dissimilar combination[J]. Optics and Lasers in Engineering, 2012, 50:1621-1627.
    [2] Wang T, Zhang B G, Chen C Q, et al. High strength electron beam welded titanium-stainless steel joint with V/Cu based composite filler metals[J].Vacuum,2013, 94:41-47.
    [3] Dey H C, Ashfaq M, Bhaduri A K, et al. Joining of titanium to304L stainless steel by friction welding[J]. Journal of Materials Processing Technology,2009, 209:5862-5870.
    [4] Li P, Li J L, Salman M, et al. Effect of friction time on mechanical and metallurgical properties of continuous drive friction welded Ti6Al4V/SUS321 joints[J]. Materials and Design, 2014, 56:649-656.
    [5] Li X, Li J L, Liao Z X, et al. Microstructure evolution and mechanical properties of rotary friction welded TC4/SUS321 joints at various rotation speeds[J]. Materials and Design, 2016, 99:26-36.
    [6]李京龙,李洵,张昊,等.摩擦焊产热基础问题探讨[J].航空制造技术,2015,20(2):42-46.
    [7] Xiong J T, Li J L, Wei Y N, et al. An analytical model of steady-state continuous drive friction welding[J].Acta Materialia,2013, 61(5):1662-1675.
    [8] Vill V I. Friction welding of metals[M]. American Welding Society, Reinhold Publish Co.,Ltd., 1962:27-33.
    [9] Crossland B. Friction welding[J]. Contemporary Physics,1971,12(6):559-574.