一种快速计算溶解油气比的工程实用方法

详细信息    查看全文 | 推荐本文 |

英文篇名：A practical engineering model for quick calculation of solution gas oil ratios 作者：魏纳 ; 席永钊 ; 刘安琪 ; 赵金洲 ; 张烈辉 ; 吕鑫 ; 李蜀涛 ; 赵向阳 英文作者：Wei Na;Xi Yongzhao;Liu Anqi;Zhao Jinzhou;Zhang Liehui;Lü Xin;Li Shutao;Zhao Xiangyang;State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation//Southwest Petroleum University;Institute of Geological Exploration and Development, CNPC Chuanqing Drilling Engineering Co., Ltd.;CNOOC Research Institute;Sinopec Research Institute of Petroleum Engineering; 关键词：天然气 ; 溶解度 ; 溶解油气比 ; 雷萨特模型 ; 美国石油协会相对密度 ; 脱气原油摩尔质量 ; 数学模型 英文关键词：Natural gas;;Solubility;;Solution gas oil ratio;;Lasater model;;API relative density;;Molar mass of dead oil;;Mathematical model 中文刊名：TRQG 英文刊名：Natural Gas Industry 机构："油气藏地质及开发工程"国家重点实验室·西南石油大学;中国石油川庆钻探工程公司地质勘探开发研究院;中海油研究总院有限责任公司;中国石化石油工程技术研究院; 出版日期：2019-04-25 出版单位：天然气工业 年：2019 期：v.39;No.306 基金：国家重点研发计划项目“海洋水合物固态流化测试新技术”(编号:2016YFC0304008);国家重点研发计划“隔水管充气双梯度钻井系统技术及工艺”(编号:2018YFC0310203);; 中国工程科技中长期发展战略研究领域战略研究项目“面向2035的深海天然气水合物开发战略研究”(编号:2017-ZCQ-5) 语种：中文; 页：TRQG201904015 页数：6 CN：04 ISSN：51-1179/TE 分类号：96-101

摘要

天然气在原油中的溶解度是评价油气溶解性的重要参数之一,在工程上需查取图版而得到,结果不够准确、使用不太方便,不适于现场快速应用。为了便于在实际工程中快速准确地计算该参数,在雷萨特的模型上将美国石油协会相对密度与脱气原油摩尔质量的图版进行取点拟合成函数关系,结合原雷萨特关系式将其数学模型归纳推理得到一个新模型,只需要代入绝对压力、温度、脱气原油对水的相对密度以及天然气对空气的相对密度4个已知参数,通过计算机便可快速计算出溶解油气比。研究结果表明:①较之于雷萨特相关式,新模型简化了繁琐的迭代,不仅可以一步到位计算溶解油气比,而且还可以从公式中反映出各个参数是如何影响溶解油气比的;②油气比随着绝对压力的增大而增大、随着温度的增大而减小、随着脱气原油对水相对密度的增大先增大后减小、随着天然气对空气相对密度的增大而减小。结论认为,新模型可以快速、准确地计算出溶解油气比,其计算结果与原雷萨特模型符合度高;新方法提高了工程上计算溶解油气比的效率及准确性,可以推广使用。
        The solubility of natural gas in crude oil is one of the important parameters of oil and gas solubility. In engineering, it can be obtained only from the chart, but the results are not accurate enough and this method is not convenient to use and not applicable for quick field application. In order to accurately and quickly calculate the solubility in the actual engineering, it is necessary to take points from the chart of API relative density and dead oil molar mass in the Lasater model and fit them into a functional relationship. Then, based on the original Lasater relation, a new model was derived from the mathematical model. So long as 4 known parameters(i.e., absolute pressure, temperature, relative density of dead oil to water and relative density of natural gas to air) are introduced into this new model, the solution gas oil ratio(GOR) can be calculated quickly by a computer. And the following research results were obtained. First, compared with Lasater relation, this new model simplifies the tedious iteration, and it can not only calculate the solution GOR in one step, but also reflect the effects of each parameter on the solution GOR in its formula. Second, the GOR increases with the increase of absolute pressure, decreases with the increase of temperature and relative density of natural gas to air, and increases firstly and then decreases with the increase of relative density of dead oil to water. In conclusion, this new model can accurately and quickly calculate the solution GOR and its calculation result is highly consistent with that of the Lasater model. In addition, this new method improves the calculation efficiency and accuracy of solution GORs in engineering, thus it is worth popularizing.

引文

[1]布雷德利HB.石油工程手册(下册)[M].北京:石油工业出版社,1996.Bradley HB.Petroleum engineering manual(Volume II)[M].Beijing:Petroleum Industry Press,1996.
    [2]魏纳,孙万通,孟英峰,周守为,付强,郭平,等.海洋天然气水合物藏钻探环空相态特性[J].石油学报,2017,38(6):710-720.Wei Na,Sun Wantong,Meng Yingfeng,Zhou Shouwei,Fu Qiang,Guo Ping,et al.Annular phase behavior analysis during marine natural gas hydrate reservoir drilling[J].Acta Petrolei Sinica,2017,38(6):710-720.
    [3]魏纳,孟英峰,吴鹏程,李皋,方强,李鹏杰,等.气体钻井空井压井井筒气液两相瞬态流动数学模型[J].天然气工业,2017,37(6):64-71.Wei Na,Meng Yingfeng,Wu Pengcheng,Li Gao,Fang Qiang,Li Pengjie,et al.A mathematical model for gas-liquid transient flow in wellbore during empty well killing in gas drilling[J].Natural Gas Industry,2017,37(6):64-71.
    [4]刘承婷.油气水多相流动计算及其应用[D].大庆:大庆石油学院,2006.Liu Chengting.Multiphase flow calculation of oil and gas and its application[D].Daqing:Daqing Petroleum University,2006.
    [5]Brown KE.The Technology of artificial lift method[M].Tulsa:Penn Well Publishing Company,1977.
    [6]李士伦.天然气工程[M].北京:石油工业出版社,2008.Li Shilun.Natural gas engineering[M].Beijing:Petroleum Industry Press,2008.
    [7]魏纳,孟英峰,李皋,李永杰,徐朝阳,李红涛.欠平衡钻井正气举过程井筒瞬态流动数值模拟[J].石油学报,2014,35(1):166-171.Wei Na,Meng Yingfeng,Li Gao,Li Yongjie,Xu Zhaoyang&Li Hongtao.Transient flow characteristics of gas lift in under balanced drilling[J].Acta Petrolei Sinica,2014,35(1):166-171.
    [8]李长俊,贾文龙.油气管道多相流[M].北京:化学工业出版社,2014.Li Changjun&Jia Wenlong.Oil and gas pipeline multiphase flow[M].Beijing:Chemical Industry Press,2014.
    [9]陈家琅,陈涛平.石油气液两相管流[M].北京:石油工业出版社,2010.Chen Jialang&Chen Taoping.Petroleum gas-liquid two-phase pipe flow[M].Beijing:Petroleum Industry Press,2010.
    [10]冯叔初,郭揆常.油气集输与矿场加工[M].东营:中国石油大学出版社,2006.Feng Shuchu&Guo Kuichang.Oil and gas gathering and transportation and mine processing[M].Dongying:China University of Petroleum Press,2006.
    [11]吕华,李为卫,方伟,许晓峰,徐婷.API标准制定程序简介[J].中国标准化,2013(1):78-80.LüHua,Li Weiwei,Fang Wei,Xu Xiaofeng&Xu Ting.Brief introduction to API procedures for standards development[J].China Standardization,2013(1):78-80.
    [12]刘利群.油气分离设备天然气量的计算[J].油田地面工程,1994,13(5):13-14.Liu Liqun.Calculation of natural gas quantity in oil and gas separation equipment[J].Oilfield Ground Engineering,1994,13(5):13-14.
    [13]杨昕谅.单管集输优化模拟程序的现场应用[D].大庆:东北石油大学,2015.Yang Xinliang.Field application of single tube gathering and optimization simulation program[D].Daqing:Northeast Petroleum University,2015.
    [14]王劲松.大口径天然气流量计检定工艺流程研究[D].成都:西南石油大学,2010.Wang Jinsong.Research on verification process of large diameter natural gas flowmeter[D].Chengdu:Southwest Petroleum University,2010.
    [15]郑智君.天然气地面输送管线水合物预测与防治研究[D].成都:西南石油大学,2014.Zheng Zhijun.Study on hydrate prediction and prevention of natural gas ground transportation pipeline[D].Chengdu:Southwest Petroleum University,2014.