基于AMESim的带式输送机起动过程研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Study on Starting Process of Belt Conveyor Based on AMESim 作者：赵松 ; 李建华 ; 魏忠斌 英文作者：Zhao Song;Li Jianhua;Wei Zhongbin;Xijing University;College of Mechanical Engineering, Xi'an University of Science and Technology; 关键词：AMESim ; 带式输送机 ; 起动过程 ; 仿真分析 英文关键词：AMESim;;belt conveyor;;starting process;;simulation analysis 中文刊名：MKJX 英文刊名：Coal Mine Machinery 机构：西京学院;西安科技大学机械工程学院; 出版日期：2019-01-15 出版单位：煤矿机械 年：2019 期：v.40;No.371 语种：中文; 页：MKJX201901018 页数：3 CN：01 ISSN：23-1280/TD 分类号：55-57

摘要

介绍了带式输送机4种常见的理想起动加速度计算公式,提出了利用AMESim软件对带式输送机的起动过程进行仿真,确定最理想加速度的方案。通过对仿真结果的比较分析,得出Harrison加速度在起动过程中对输送带的冲击最小,并对不同的起动时间进行仿真,结果显示起动时间越长,起动过程对输送带的冲击越小。
        Introducing the calculation formula of four kinds of ideal starting acceleration for belt conveyor,the starting process of belt conveyor was simulated by using AMESim software. Scheme of the optimal acceleration was determined. Through the comparative analysis of the simulation results. It is concluded that the impact of Harrison acceleration on the conveyor belt is minimal during the starting process,and the simulation of different start time was carried out. The results show that the longer the starting time, the smaller the impact of the starting process on the conveyor belt.

引文

[1]王光炳.带式输送机可控软起动装置的研究[J].煤炭学报, 2003,28(3):316-321.
    [2]张文娟,杨绍杰.基于计算机仿真技术的复杂带式输送机动力学分析[J].煤炭技术, 2013, 32(7):25-26.
    [3]杨红涛.煤矿大型带式输送机常用软启动装置的比较[J].煤炭技术, 2014,33(8):174-176.
    [4]唐印伟,路延秋.矿用大型带式输送机控制系统优化设计研究[J].煤炭技术, 2010, 29(2):45-47.
    [5]李建华,赵松.基于AMESim的带式输送机建模方法研究[J].煤矿机械, 2014,35(9):45-47.