缝隙诱导轮多工况汽蚀性能研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Study on cavitation performance of gap inducer under multi-operating conditions 作者：王文廷 ; 许开富 ; 李永鹏 ; 严俊峰 英文作者：WANG Wenting;XU Kaifu;LI Yongpeng;YAN Junfeng;Xi'an Aerospace Propulsion Institute; 关键词：缝隙诱导轮 ; 多工况 ; 汽蚀性能 英文关键词：gap inducer;;multi-operating conditions;;cavitation performance 中文刊名：HJTJ 英文刊名：Journal of Rocket Propulsion 机构：西安航天动力研究所; 出版日期：2019-02-15 出版单位：火箭推进 年：2019 期：v.45;No.227 基金：中国航天科技集团公司支撑项目(2011TY09) 语种：中文; 页：HJTJ201901002 页数：6 CN：01 ISSN：61-1436/V 分类号：11-16

摘要

针对某流量工况变比20的高速离心泵,为提升其变工况抗汽蚀性能,提出了缝隙诱导轮方案。分别进行了常规变螺距诱导轮和缝隙诱导轮泵汽蚀仿真计算和水力性能试验,分析了多工况泵的汽蚀断裂特性和汽蚀气泡分布等流场特征,获得了两种诱导轮泵多工况汽蚀性能和外特性。结果表明,与常规诱导轮相比,缝隙诱导轮拓宽了高速离心泵稳定工作工况范围,小流量工况泵的抗汽蚀性能明显提升,额定工况汽蚀性能相当;缝隙诱导轮小流量工况效率略有提升,大流量工况泵效率和扬程均有降低。
        To improve the anti-cavitation performance of a high speed centrifugal pump with a variable flow ratio of 20,a gap inducer was designed. The cavitaion simulation calculation and hydrodynamic performance test of pumps with conventional variable-pitch inducer and gap inducer were carried out,respectively,respectively. The head cavitation collapse characteristics of the pump under multi-operating conditions and the flow fields characteristics,such as the cavitation bubble distribution of the inducer blade channels were analyzed. The cavitation performance and external characteristics of two centrifugal inducer pump under multi-operating conditions were obtained. The results show that the gap inducer increase the operating range of the high speed centrifugal pump, compared with conventional inducer. Besides, the anti-cavitation performance of the pump with low flow rate is improved significantly. Meanwhile,the cavitation performance under design condition is nearly the same. On the other hand,the efficiency of the gap inducer with the small flow rate is slightly improved,while the efficiency and head of the pump with the large flow rate are both reduced.

引文

[1]白东安.涡轮泵超低工况性能研究[J].火箭推进,2008,34(3):13-16.BAI D A.Research on the turbo-pump performance under ultra-low operation condition[J].Journal of Rocket Propulsion,2008,34(3):13-16.
    [2]陈晖,张恩昭,谭永华,等.高速平板诱导轮的结构设计与分析[J].火箭推进,2009,35(3):1-5.CHEN H,ZHANG E Z,TAN Y H,et al.Geometry design and analysis o Ithel high-speed rotational plate inducer[J].Journal of Rocket Propulsion,2009,35(3):1-5.
    [3]孔繁余,黄建军.离心泵变螺距诱导轮的开发[J].排灌机械,2008,26(3):10-14.
    [4]李永鹏,陈晖,王文廷,等.多工况高抗汽蚀性能的诱导轮设计[J].排灌机械工程学报,2014,32(11):948-954.
    [5]郭晓梅,李昳,崔宝玲,等.前置不同诱导轮高速离心泵旋转空化特性研究[J].航空学报,2013,34(7):1572-1581.
    [6]李欣,肖立明,刘畅,等.三叶片两级诱导轮的气蚀性能研究[J].火箭推进,2018,44(6):86-90.LI X,XIAO L M,LIU C,et al.Study on cavitation performance of a two-stage inducer with three-blades[J].Journal of Rocket Propulsion,2018,44(6):86-90.
    [7]唐飞,李家文,李永,等.提高液体火箭发动机诱导轮汽蚀性能的研究[J].火箭推进,2013,39(3):44-49,57.TANG F,LI J W,LI Y,et al.Study on improving cavitation performance of inducer for liquid rocket engine[J].Journal of Rocket Propulsion,2013,39(3):44-49,57.
    [8]庄宿国,张亚,陈杰,等.型线变化规律对诱导轮性能影响的仿真分析及应用[J].安徽理工大学学报(自然科学版),2017,37(5):63-69.
    [9]王培.叶顶间隙对诱导轮内部气液两相流动及性能的影响[D].杭州:浙江理工大学,2018.
    [10]程效锐,符丽,包文瑞.等螺距诱导轮的螺距变化对离心泵汽蚀性能的影响[J].兰州理工大学学报,2018,44(2):48-53.
    [11]李龙贤,林奇燕,丁振晓.诱导轮空化流场数值计算及实验研究[J].真空与低温,2018,24(4):251-258.
    [12]李世煌.叶片泵的非设计工况及其优化设计[M].北京:中国宇航出版社,2006.
    [13]王文廷,陈晖,李永鹏,等.高速离心泵诱导轮与离心轮的匹配[J].排灌机械工程学报,2015,33(4):301-305.
    [14]刘贺.离心泵诱导轮与叶轮的匹配特性研究[D].兰州:兰州理工大学,2018.
    [15]孙强强,蒋劲,张帅帅.变螺距诱导轮对高速离心泵空化性能的影响[J].排灌机械工程学报,2017,35(10):856-862.
    [16]杨宝锋,李斌,陈晖,等.火箭发动机推进剂泵诱导轮与离心轮匹配研究[J].航空学报,2019.
    [17]朱兵.缝隙引流叶片提高低比转速离心泵性能的机理研究[D].上海:上海大学,2004.
    [18]朱祖超.提高高速泵气蚀性能的理论分析与试验研究[J].机械工程学报,1999,35(6):85-88.
    [19]唐飞,李家文,夏德新,等.提高氧泵诱导轮汽蚀性能的方法研究[J].航空动力学报,2008,23(9):1743-1747.
    [20]侯杰,于海力,杨敏.低汽蚀余量髙速泵诱导轮研究[J].火箭推进,2014,40(6):19-23,43.HOU J,YU H L,YANG M.Study of inducers for lowNPSHr high-speed pumps[J].Journal of Rocket Propulsion,,2014,40(6):19-23,43.