铁基滑动轴承材料研究进展
|
摘要
对铁基滑动轴承材料的发展进行综述,重点阐述了铁基滑动轴承材料的分类、性能特点及适用工况,给出了铁基滑动轴承材料常用润滑相和硬质颗粒增强相材料,详细讨论了硬质颗粒增强相和润滑相材料对铁基滑动轴承摩擦磨损等性能的影响及对应的磨损机理,分析了铁基滑动轴承材料的未来发展方向。
This paper is an overview on the current research on iron- based sliding bearing materials. The classification,property and application condition of iron- based sliding bearing materials are mainly described. The general lubrication materials and iron- based sliding bearing materials reinforced by hard particles are presented. The effects of hard particles reinforced phase and lubricating materials on the friction and wear properties of iron- based powder materials are discussed in detail. The future development trend of the iron- based material for sliding bearing is analyzed.
This paper is an overview on the current research on iron- based sliding bearing materials. The classification,property and application condition of iron- based sliding bearing materials are mainly described. The general lubrication materials and iron- based sliding bearing materials reinforced by hard particles are presented. The effects of hard particles reinforced phase and lubricating materials on the friction and wear properties of iron- based powder materials are discussed in detail. The future development trend of the iron- based material for sliding bearing is analyzed.
引文
[1]丁光玉,贾成厂,苗晓丽,等.新型铁基固体自润滑复合材料摩擦学特性的研究[J].粉末冶金技术,2010,28(2):111-114.
[2]郭建刚,金士锋,王刚,等.新型铁基超导体材料的研究进展[J].物理,2011,40(8):510-515.
[3]张现平,马衍伟.新型铁基超导材料的制备和性能[J].科学通报,2013,58(11):986-995.
[4]Aswathy P M,Anooja J B,Sarun P M,et al.An Overview on Rron Based Superconductors[J].Superconductor Science and Technology,2010(23):11-20.
[5]濮良贵.机械设计[M].北京:北京高等教育出版社,2006.
[6]齐朝杰,王平原,申玄伟,等.滑动轴承的概述[J].科技资讯,2014(10):80-81.
[7]董雪飞,樊文欣,孙友谊,等.内燃机滑动轴承复合材料研究[J].热加工工艺,2010,39(12):87-90.
[8]尹延国,焦明华,俞建卫,等.铁基粉末冶金含油材料摩擦学性能[J].金属功能材料,2006,13(5):14-17.
[9]Sun Cuixia,Dai Lei,He Xiaoye,et al.Effect of Heat Treatment on Physical,Structural,Thermal and Morphological Characteristics of Zein in Ethanol-Water Solution[J].Food Hydrocolloids,2016(58):11-19.
[10]Sui Yuan,Wisniewski Michael,Droby Samir,et al.Recent Advances and Current Status of the Use of Heat Treatments in Postharvest Disease Management Systems:Is it time to turn up the heat?[J].Trends in Food Science&Technology,2016(51):34-40.
[11]Giovanni Straffelini,Piyush Chandra Verma,Ibrahim Metinoz,et al.Wear Behavior of a Low Metallic Friction Material Dry Sliding Against a Cast Iron Disc:Role of the Heat-Treatment of the Disc[J].Wear,2016(348/349):10-16.
[12]Shiv Kumar,Ashish Bhattacharyya,Dipak Kumar Mondal,et al.Dry Sliding Wear Behaviour of Medium Carbon Steel Against an Alumina Disk[J].Wear,2011(270):413-421.
[13]Marta Paczkowska.The Evaluation of the Influence of Laser Treatment Parameters on the Type of Thermal Effects in the Surface Layer Microstructure of Gray Irons[J].Optics&Laser Technology,2016(76):143-148.
[14]Fu Z K,Ding H H,Wang W J,et al.Investigation on Microstructure and Wear Characteristic of Laser Cladding Fe-Based Alloy on Wheel/Rail Materials[J].Wear,2015(330/331):592-599.
[15]Yasir Muhammad,Zhang Cheng,Wang Wei,et al.Wear Behaviors of Fe-Based Amorphous Composite Coatings Reinforced by Al2O3Particles in Air and in Na Cl Solution[J].Materials and Design,2015(88):207-213.
[16]Wang Wei,Zhang Cheng,Xu Peng.et al.Enhancement of Oxidation and Wear Resistance of Fe-Based Amorphous Coatings by Surface Modification of Feedstock Powders[J].Materials and Design,2015(73):35-41.
[17]Fehim Findik.Latest Progress on Tribological Properties of Industrial Materials[J].Materials and Design,2014(57):218-244.
[18]Zhang Hongzhou,Zhang Lin,Dong Guoqiang,et al.Effects of Annealing on High Velocity Compaction Behavior and Mechanical Properties of Iron-Base PM Alloy[J].Powder Technology,2016(288):435-440.
[19]Chattopadhyay C,Sangal S,Mondal K,et al.Improved Wear Resistance of Medium Carbon Microalloyed Bainitic Steels[J].Wear,2012(289):168-179.
[20]Vigilio Fontanari,Matteo Benedetti,Christian Girardi,et al.Investigation of the Lubricated Wear Behavior of Ductile Cast iron and Quenched and Tempered Alloy Steel for Possible Use in Worm Gearing[J].Wear,2016(350/351):68-73.
[21]程敏.双层铁基粉末冶金材料组织与性能研究[D].南京:南京理工大学,2013.
[22]张世凭,尹红,丁义超.铁基复合材料的研究进展[J].热加工工艺,2011,40(18):94-97.
[23]高跃岗,姚秀荣,刘兆晶,等.国外铁基复合材料的发展及应用[J].合肥工业大学学报(自然科学版),2006,29(4):431-436.
[24]高义民.陶瓷颗粒增强铁基表面复合材料的研究现状与最新进展[J].铸造,2012(9):985-990.
[25]Gatti A.Iron-Alumina Materials[J].Transaction AIME,1959,215(5):753-755.
[26]牛朝东,葛彪,贾善顺,等.Al2O3/Fe复合材料的制备及微观组织[J].煤炭技术,2006,25(3):6-9.
[27]徐峰,李建刚,冯小明,等.Al2O3颗粒表面镀铜铁基摩擦材料的研究[J].热加工工艺,2009,38(2):61-63.
[28]Zhang H,Zou Y,Zou Z,et al.Microstructures and Properties of Low-Chromium High Corrosion-Resistant Ti C-VC Reinforced Fe-Based Laser Cladding Layer[J].Alloys Compd,2015(622):62-68.
[29]Zhong L,Ye F,Xu Y,et al.Microstructure and Abrasive Wear Characteristics of in Situ Vanadium Carbide Particulate-Reinforced Iron Matrix Composites[J].Mater Des,2014(54):564-569.
[30]Libin Niu,Mirabbos Hojamberdiev,Yunhua Xu.Preparation of in Situ-Formed WC/Fe Composite on Gray Cast Iron Substrate by a Centrifugal Casting Process[J].Journal of Materials Processing Technology,2010(210):1 986-1 990.
[31]Ni Zifei,Sun Yangshan,Xue Feng,et al.Evaluation of Electroslag Remelting in Ti C Particle Reinforced 304Stainless Steel[J].Materials Science and Engineering:A,2011,528(18):5 664-5 669.
[32]Hu S W,Zhao Y G,Wang Z,et al.Fabrication of in Situ Ti C Locally Reinforced Manganese Steel Matrix Composite Via Combustion Synthesis During Casting[J].Materials&Design,2013(44):340-345.
[33]Razavi M,Yaghmaee M S,Rahimipour M R,et al.The Effect of Production Method on Properties of Fe-Ti C Composite[J].International Journal of Mineral Processing,2010(94):97-100.
[34]Zhong L,Xu Y,Mirabbos Hojamberdiev,et al.In Situ Fabrication of Titanium Carbide Particulates-Reinforced Iron Matrix Composites[J].Materials&Design,2011(32):3 790-3 795.
[35]王晓莉,王静,伏思静,等,碳化钛颗粒增强铁基表面复合材料的研究[J].材料热处理技术,2011,40(16):69-74.
[36]王静,粉末冶金合成Ti C铁基复合材料的耐磨性研究[J].材料热处理技术,2008,137(6):49-57.
[37]王植,雷剑波,姜伟,等,激光熔覆Fe基Ti C涂层的组织与性能[J].粉末冶金材料科学与工程,2016,21(1):43-49.
[38]Wang J,Wang Y.In-Situ Production of Fe-Ti C Composite[J].Materials Letters,2007,61(22):4 393-4 395.
[39]Ni Zifei,Sun Yangshan,Xue Feng,et al.Microstructure and Properties of Austenitic Stainless Steel Reinforced with in Situ Ti C Particulate[J].Materials and Design,2011(32):1 462-1 467.
[40]Yi D,Yu P,Hu B,et al.Preparation of Nickel-Coated Titanium Carbide Particulates and their Use in the Production of Reinforced Iron Matrix Composites[J].Materials and Design,2013(52):572-579.
[41]彭思源,朱绍峰,康毅忠.WC颗粒增强铁基耐磨复合材料的研究现状[J].机械工程师,2014(11):40-43.
[42]Zhou R,Jiang Y,Lu D.The Effect of Volume Fraction of WC Particles on Erosion Resistance of WC Reinforced Iron Matrix Surface Composites[J].Wear,2003(255):134-138.
[43]Li Z,Jiang Y,Zhou R,et al.Effect of Cr Addition on the Microstructure and Abrasive Wear Resistance of WC-Reinforced Iron Matrix Surface Composites[J].Materials Research Society,2014(29):778-785.
[44]王志胜,李祖来,蒋业华,等.WC颗粒增强钢基表面复合材料的高温摩擦磨损性能[J].铸造,2010,59(3):280-283.
[45]丁义超,王一三,王静,等.V8C7增强铁基复合材料的制备和性能[J].材料研究学报,2008,22(3):317-321.
[46]张双益,肖志瑜,冼志勇,等.Si C颗粒增强铁基粉末冶金复合材料的研究[J].华南理工大学学报(自然科学版),1999,27(5):105-110.
[47]Tekeli S,Gural A.Dry Sliding Wear Behaviour of Heat Treated Iron Based Powder Metallurgy Steels with0.3%Graphite+2%Ni Additions[J].Materials and Design,2007(28):1 923-1 927.
[48]Sudhakar K V,Sampathkumaran P,Dwaraka D E S.Dry Sliding Wear in High Density Fe-2%Ni Based P/M alloys[J].Wear,2000(242):207-212.
[49]Khorsand H,Habibi S M,Yoozbashizadea H,et al.The Role of Heat Treatment on Wear Behavior of Powder Metallurgy Low Alloy Steels[J].Materials and Design,2002(23):667-670.
[50]宁莉萍,王静波,欧阳锦林,等.铜和石墨对铁基含油自润滑复合材料机械及摩擦学性能的影响[J].摩擦学报,2001,21(5):336-339.
[51]Kandavel T K,Chandramouli R,Manoj M,et al.Influence of Copper and Molybdenum on Dry Sliding Wear Behaviour of Sintered Plain Carbon Steel[J].Materials and Design,2013(50):728-736.
[52]Wilbert D,Wong-ángel,Lucia Téllez-Jurado,et al.Effect of Copper on the Mechanical Properties of Alloys Formed by Powder Metallurgy[J].Materials and Design,2014(58):12-18.
[53]Dong Y,Jun L,Wen J,et al.Effect of Cu Addition on Microstructure and Mechanical Properties of 15%Cr Super Martensitic Stainless Steel[J].Materials and Design,2012(41):16-22.
[54]Bernier F,Gauthier M,Plamondon P,et al.Copper Strengthening of PM Steel Parts[J].International Journal of Powder Metallurgy,2011(47):11-19.
[55]Gandraa J,Krohnb H,Miranda R M,et al.Friction Surfacing-A Review[J].Journal of Materials Processing Technology,2014(214):1 062-1 093.
[56]Bedolla-Jacuinde A,Guerra F V,Rainforth M,et al.Sliding Wear Behavior of Austempered Ductile Iron Microalloyed with Boron[J].Wear,2015(330/331):23-31.
[57]Mustafa Col,Funda Gül Koc,Hasan Oktem,et al.The Role of Boron Content in High Alloy White Cast Iron(Ni-Hard4)on Microstructure,Mechanical Properties and Wear Resistance[J].Wear,2016(348/349):158-165.
[58]Ibrahim Metinoz,Ilaria Cristofolini,Alberto Molinari.Influence of Ni Content on Dry Sliding Wear Behavior of Sintered and Carburized Steels[J].Journal of Materials Enginearing&Performance,2014,23(10):3 630-3 639.
[59]梁昌霞,潘冶,王凤云.Ce O2对铁基自润滑轴承材料性能的影响[J].材料导报,2010,24(8):57-61.
[60]陈华,郭美娜,曹晓杰,等.铬对铁基预合金粉末烧结组织性能的影响[J].热加工工艺,2006,35(18):3-6.
[61]Dhanasekaran S,Gnanamoorthy R.Dry Sliding Friction and Wear Characteristics of Fe-C-Cu Alloy Containing Molybdenum Disulphide[J].Materials and Design,2007(28):1 135-1 141.
[62]Li Jianliang,Xiong Dangsheng.Tribological Properties of Nickel-Based Self-Lubricating[J].Wear,2008(265):533-539.
[63]Stott F H.High Temperature Sliding Wear of Metals[J].Tribology International,2002(35):489-495.
[64]陈洁.Mo S2在铁基粉末冶金摩擦材料中的作用机理[D].长沙:中南大学,2004.
[65]Surapol Raadnui,Sithipong Mahathanabodee,Ruangdaj Tongsri.Tribological Behaviour of Sintered 316L Stainless Steel Impregnated with Mo S2Plain Bearing[J].Wear,2008(265):546-553.
[66]王天国,梁启超,覃群.烧结温度对Fe-Cu-Mo-C合金组织和性能的影响[J].粉末冶金工业,2016,26(2):27-30.
[67]郭鸿儒,陆龙,王静波.Mo含量对Fe石墨材料高温摩擦学特性的影响[J].甘肃科技纵横,2012,41(1):33-34.
[68]丁存光,柳学全,李红印,等.钼对铁基粉末冶金自润滑材料力学及摩擦学性能的影响[J].粉末冶金工业,2010,20(3):26-30.
[69]Lorella Ceschinia,Giuseppe Palombarini,Giuliano Sambogna,et al.Friction and Wear Behaviour of Sintered Steels Submitted to Sliding and Abrasion Tests[J].Tribology International,2006(39):748-755.
[70]Yu Chengbo,Jia Shaocheng,Li Qi.Effects of Porosity on Seismic Velocities,Elastic Moduli and Poissons’Ratios of Solid Materials and Rocks[J].Journal of Rock Mechanics and Geotechnical Engineering,2016(8):35-49.
[71]Chen Meng,Wang Hongjie,Jin Haiyun,et al.Effect of Pores on Crack Propagation Behavior for Porous Si3N4Ceramics[J].Ceramics International,2016(42):5 642-5 649.
[72]韩杰胜,刘维民,吕晋军,等.Fe-Mo-(Mo S2/Pb O)高温自润滑材料的摩擦学特性[J].材料科学与工程学报,2008,26(1):118-121.
[73]郭俊德,何世权,马文林,等.Fe-Mo-Ni-Cu-石墨高温自润滑复合材料的摩擦学性能研究[J].摩擦学学报,2014,34(6):617-622.
[2]郭建刚,金士锋,王刚,等.新型铁基超导体材料的研究进展[J].物理,2011,40(8):510-515.
[3]张现平,马衍伟.新型铁基超导材料的制备和性能[J].科学通报,2013,58(11):986-995.
[4]Aswathy P M,Anooja J B,Sarun P M,et al.An Overview on Rron Based Superconductors[J].Superconductor Science and Technology,2010(23):11-20.
[5]濮良贵.机械设计[M].北京:北京高等教育出版社,2006.
[6]齐朝杰,王平原,申玄伟,等.滑动轴承的概述[J].科技资讯,2014(10):80-81.
[7]董雪飞,樊文欣,孙友谊,等.内燃机滑动轴承复合材料研究[J].热加工工艺,2010,39(12):87-90.
[8]尹延国,焦明华,俞建卫,等.铁基粉末冶金含油材料摩擦学性能[J].金属功能材料,2006,13(5):14-17.
[9]Sun Cuixia,Dai Lei,He Xiaoye,et al.Effect of Heat Treatment on Physical,Structural,Thermal and Morphological Characteristics of Zein in Ethanol-Water Solution[J].Food Hydrocolloids,2016(58):11-19.
[10]Sui Yuan,Wisniewski Michael,Droby Samir,et al.Recent Advances and Current Status of the Use of Heat Treatments in Postharvest Disease Management Systems:Is it time to turn up the heat?[J].Trends in Food Science&Technology,2016(51):34-40.
[11]Giovanni Straffelini,Piyush Chandra Verma,Ibrahim Metinoz,et al.Wear Behavior of a Low Metallic Friction Material Dry Sliding Against a Cast Iron Disc:Role of the Heat-Treatment of the Disc[J].Wear,2016(348/349):10-16.
[12]Shiv Kumar,Ashish Bhattacharyya,Dipak Kumar Mondal,et al.Dry Sliding Wear Behaviour of Medium Carbon Steel Against an Alumina Disk[J].Wear,2011(270):413-421.
[13]Marta Paczkowska.The Evaluation of the Influence of Laser Treatment Parameters on the Type of Thermal Effects in the Surface Layer Microstructure of Gray Irons[J].Optics&Laser Technology,2016(76):143-148.
[14]Fu Z K,Ding H H,Wang W J,et al.Investigation on Microstructure and Wear Characteristic of Laser Cladding Fe-Based Alloy on Wheel/Rail Materials[J].Wear,2015(330/331):592-599.
[15]Yasir Muhammad,Zhang Cheng,Wang Wei,et al.Wear Behaviors of Fe-Based Amorphous Composite Coatings Reinforced by Al2O3Particles in Air and in Na Cl Solution[J].Materials and Design,2015(88):207-213.
[16]Wang Wei,Zhang Cheng,Xu Peng.et al.Enhancement of Oxidation and Wear Resistance of Fe-Based Amorphous Coatings by Surface Modification of Feedstock Powders[J].Materials and Design,2015(73):35-41.
[17]Fehim Findik.Latest Progress on Tribological Properties of Industrial Materials[J].Materials and Design,2014(57):218-244.
[18]Zhang Hongzhou,Zhang Lin,Dong Guoqiang,et al.Effects of Annealing on High Velocity Compaction Behavior and Mechanical Properties of Iron-Base PM Alloy[J].Powder Technology,2016(288):435-440.
[19]Chattopadhyay C,Sangal S,Mondal K,et al.Improved Wear Resistance of Medium Carbon Microalloyed Bainitic Steels[J].Wear,2012(289):168-179.
[20]Vigilio Fontanari,Matteo Benedetti,Christian Girardi,et al.Investigation of the Lubricated Wear Behavior of Ductile Cast iron and Quenched and Tempered Alloy Steel for Possible Use in Worm Gearing[J].Wear,2016(350/351):68-73.
[21]程敏.双层铁基粉末冶金材料组织与性能研究[D].南京:南京理工大学,2013.
[22]张世凭,尹红,丁义超.铁基复合材料的研究进展[J].热加工工艺,2011,40(18):94-97.
[23]高跃岗,姚秀荣,刘兆晶,等.国外铁基复合材料的发展及应用[J].合肥工业大学学报(自然科学版),2006,29(4):431-436.
[24]高义民.陶瓷颗粒增强铁基表面复合材料的研究现状与最新进展[J].铸造,2012(9):985-990.
[25]Gatti A.Iron-Alumina Materials[J].Transaction AIME,1959,215(5):753-755.
[26]牛朝东,葛彪,贾善顺,等.Al2O3/Fe复合材料的制备及微观组织[J].煤炭技术,2006,25(3):6-9.
[27]徐峰,李建刚,冯小明,等.Al2O3颗粒表面镀铜铁基摩擦材料的研究[J].热加工工艺,2009,38(2):61-63.
[28]Zhang H,Zou Y,Zou Z,et al.Microstructures and Properties of Low-Chromium High Corrosion-Resistant Ti C-VC Reinforced Fe-Based Laser Cladding Layer[J].Alloys Compd,2015(622):62-68.
[29]Zhong L,Ye F,Xu Y,et al.Microstructure and Abrasive Wear Characteristics of in Situ Vanadium Carbide Particulate-Reinforced Iron Matrix Composites[J].Mater Des,2014(54):564-569.
[30]Libin Niu,Mirabbos Hojamberdiev,Yunhua Xu.Preparation of in Situ-Formed WC/Fe Composite on Gray Cast Iron Substrate by a Centrifugal Casting Process[J].Journal of Materials Processing Technology,2010(210):1 986-1 990.
[31]Ni Zifei,Sun Yangshan,Xue Feng,et al.Evaluation of Electroslag Remelting in Ti C Particle Reinforced 304Stainless Steel[J].Materials Science and Engineering:A,2011,528(18):5 664-5 669.
[32]Hu S W,Zhao Y G,Wang Z,et al.Fabrication of in Situ Ti C Locally Reinforced Manganese Steel Matrix Composite Via Combustion Synthesis During Casting[J].Materials&Design,2013(44):340-345.
[33]Razavi M,Yaghmaee M S,Rahimipour M R,et al.The Effect of Production Method on Properties of Fe-Ti C Composite[J].International Journal of Mineral Processing,2010(94):97-100.
[34]Zhong L,Xu Y,Mirabbos Hojamberdiev,et al.In Situ Fabrication of Titanium Carbide Particulates-Reinforced Iron Matrix Composites[J].Materials&Design,2011(32):3 790-3 795.
[35]王晓莉,王静,伏思静,等,碳化钛颗粒增强铁基表面复合材料的研究[J].材料热处理技术,2011,40(16):69-74.
[36]王静,粉末冶金合成Ti C铁基复合材料的耐磨性研究[J].材料热处理技术,2008,137(6):49-57.
[37]王植,雷剑波,姜伟,等,激光熔覆Fe基Ti C涂层的组织与性能[J].粉末冶金材料科学与工程,2016,21(1):43-49.
[38]Wang J,Wang Y.In-Situ Production of Fe-Ti C Composite[J].Materials Letters,2007,61(22):4 393-4 395.
[39]Ni Zifei,Sun Yangshan,Xue Feng,et al.Microstructure and Properties of Austenitic Stainless Steel Reinforced with in Situ Ti C Particulate[J].Materials and Design,2011(32):1 462-1 467.
[40]Yi D,Yu P,Hu B,et al.Preparation of Nickel-Coated Titanium Carbide Particulates and their Use in the Production of Reinforced Iron Matrix Composites[J].Materials and Design,2013(52):572-579.
[41]彭思源,朱绍峰,康毅忠.WC颗粒增强铁基耐磨复合材料的研究现状[J].机械工程师,2014(11):40-43.
[42]Zhou R,Jiang Y,Lu D.The Effect of Volume Fraction of WC Particles on Erosion Resistance of WC Reinforced Iron Matrix Surface Composites[J].Wear,2003(255):134-138.
[43]Li Z,Jiang Y,Zhou R,et al.Effect of Cr Addition on the Microstructure and Abrasive Wear Resistance of WC-Reinforced Iron Matrix Surface Composites[J].Materials Research Society,2014(29):778-785.
[44]王志胜,李祖来,蒋业华,等.WC颗粒增强钢基表面复合材料的高温摩擦磨损性能[J].铸造,2010,59(3):280-283.
[45]丁义超,王一三,王静,等.V8C7增强铁基复合材料的制备和性能[J].材料研究学报,2008,22(3):317-321.
[46]张双益,肖志瑜,冼志勇,等.Si C颗粒增强铁基粉末冶金复合材料的研究[J].华南理工大学学报(自然科学版),1999,27(5):105-110.
[47]Tekeli S,Gural A.Dry Sliding Wear Behaviour of Heat Treated Iron Based Powder Metallurgy Steels with0.3%Graphite+2%Ni Additions[J].Materials and Design,2007(28):1 923-1 927.
[48]Sudhakar K V,Sampathkumaran P,Dwaraka D E S.Dry Sliding Wear in High Density Fe-2%Ni Based P/M alloys[J].Wear,2000(242):207-212.
[49]Khorsand H,Habibi S M,Yoozbashizadea H,et al.The Role of Heat Treatment on Wear Behavior of Powder Metallurgy Low Alloy Steels[J].Materials and Design,2002(23):667-670.
[50]宁莉萍,王静波,欧阳锦林,等.铜和石墨对铁基含油自润滑复合材料机械及摩擦学性能的影响[J].摩擦学报,2001,21(5):336-339.
[51]Kandavel T K,Chandramouli R,Manoj M,et al.Influence of Copper and Molybdenum on Dry Sliding Wear Behaviour of Sintered Plain Carbon Steel[J].Materials and Design,2013(50):728-736.
[52]Wilbert D,Wong-ángel,Lucia Téllez-Jurado,et al.Effect of Copper on the Mechanical Properties of Alloys Formed by Powder Metallurgy[J].Materials and Design,2014(58):12-18.
[53]Dong Y,Jun L,Wen J,et al.Effect of Cu Addition on Microstructure and Mechanical Properties of 15%Cr Super Martensitic Stainless Steel[J].Materials and Design,2012(41):16-22.
[54]Bernier F,Gauthier M,Plamondon P,et al.Copper Strengthening of PM Steel Parts[J].International Journal of Powder Metallurgy,2011(47):11-19.
[55]Gandraa J,Krohnb H,Miranda R M,et al.Friction Surfacing-A Review[J].Journal of Materials Processing Technology,2014(214):1 062-1 093.
[56]Bedolla-Jacuinde A,Guerra F V,Rainforth M,et al.Sliding Wear Behavior of Austempered Ductile Iron Microalloyed with Boron[J].Wear,2015(330/331):23-31.
[57]Mustafa Col,Funda Gül Koc,Hasan Oktem,et al.The Role of Boron Content in High Alloy White Cast Iron(Ni-Hard4)on Microstructure,Mechanical Properties and Wear Resistance[J].Wear,2016(348/349):158-165.
[58]Ibrahim Metinoz,Ilaria Cristofolini,Alberto Molinari.Influence of Ni Content on Dry Sliding Wear Behavior of Sintered and Carburized Steels[J].Journal of Materials Enginearing&Performance,2014,23(10):3 630-3 639.
[59]梁昌霞,潘冶,王凤云.Ce O2对铁基自润滑轴承材料性能的影响[J].材料导报,2010,24(8):57-61.
[60]陈华,郭美娜,曹晓杰,等.铬对铁基预合金粉末烧结组织性能的影响[J].热加工工艺,2006,35(18):3-6.
[61]Dhanasekaran S,Gnanamoorthy R.Dry Sliding Friction and Wear Characteristics of Fe-C-Cu Alloy Containing Molybdenum Disulphide[J].Materials and Design,2007(28):1 135-1 141.
[62]Li Jianliang,Xiong Dangsheng.Tribological Properties of Nickel-Based Self-Lubricating[J].Wear,2008(265):533-539.
[63]Stott F H.High Temperature Sliding Wear of Metals[J].Tribology International,2002(35):489-495.
[64]陈洁.Mo S2在铁基粉末冶金摩擦材料中的作用机理[D].长沙:中南大学,2004.
[65]Surapol Raadnui,Sithipong Mahathanabodee,Ruangdaj Tongsri.Tribological Behaviour of Sintered 316L Stainless Steel Impregnated with Mo S2Plain Bearing[J].Wear,2008(265):546-553.
[66]王天国,梁启超,覃群.烧结温度对Fe-Cu-Mo-C合金组织和性能的影响[J].粉末冶金工业,2016,26(2):27-30.
[67]郭鸿儒,陆龙,王静波.Mo含量对Fe石墨材料高温摩擦学特性的影响[J].甘肃科技纵横,2012,41(1):33-34.
[68]丁存光,柳学全,李红印,等.钼对铁基粉末冶金自润滑材料力学及摩擦学性能的影响[J].粉末冶金工业,2010,20(3):26-30.
[69]Lorella Ceschinia,Giuseppe Palombarini,Giuliano Sambogna,et al.Friction and Wear Behaviour of Sintered Steels Submitted to Sliding and Abrasion Tests[J].Tribology International,2006(39):748-755.
[70]Yu Chengbo,Jia Shaocheng,Li Qi.Effects of Porosity on Seismic Velocities,Elastic Moduli and Poissons’Ratios of Solid Materials and Rocks[J].Journal of Rock Mechanics and Geotechnical Engineering,2016(8):35-49.
[71]Chen Meng,Wang Hongjie,Jin Haiyun,et al.Effect of Pores on Crack Propagation Behavior for Porous Si3N4Ceramics[J].Ceramics International,2016(42):5 642-5 649.
[72]韩杰胜,刘维民,吕晋军,等.Fe-Mo-(Mo S2/Pb O)高温自润滑材料的摩擦学特性[J].材料科学与工程学报,2008,26(1):118-121.
[73]郭俊德,何世权,马文林,等.Fe-Mo-Ni-Cu-石墨高温自润滑复合材料的摩擦学性能研究[J].摩擦学学报,2014,34(6):617-622.