3D打印技术在砂型铸造领域的应用前景浅析
|
摘要
结合砂型铸造行业面临的自身发展、产品结构以及环保政策等问题,阐述了采用3D打印技术在砂型铸造领域产业化应用的优势,并详细介绍了3D砂型打印在汽车转向器领域、发动机领域以及电机领域的应用实例,说明了铸造砂型3D打印设备的应用,简化了造型工艺,缩短了生产周期,降低了铸件制造成本,有效地提高了新产品研发效率,可在结构复杂、质量要求高、单件小批量铸件制造领域进行大范围推广应用。
Combining the problems of self-development,product structure and environmental protection policies faced by the sand-casting industry,the advantages of industrial application of 3 D printing technology in sand casting were introduced. And3 D sand printing was elaborated in detail in the field of automobile steering gear and engine. The application of foundry sand type 3 D printing equipment was illustrated. That simplified the molding process,greatly shortens the production cycle,reduced the manufacturing cost of castings,and effectively improved the research and development efficiency of new products. It could be used in complex structures,high quality requirements,single-piece small batch castings and widely used and promoted in manufacturing field.
Combining the problems of self-development,product structure and environmental protection policies faced by the sand-casting industry,the advantages of industrial application of 3 D printing technology in sand casting were introduced. And3 D sand printing was elaborated in detail in the field of automobile steering gear and engine. The application of foundry sand type 3 D printing equipment was illustrated. That simplified the molding process,greatly shortens the production cycle,reduced the manufacturing cost of castings,and effectively improved the research and development efficiency of new products. It could be used in complex structures,high quality requirements,single-piece small batch castings and widely used and promoted in manufacturing field.
引文
[1]郭少豪,吕振.3D打印改变世界的新机遇新浪潮[M].北京:清华大学出版社,2013.
[2]张渝.3D打印技术及其在快速铸造成形中的应用[J].铸造技术,2016,(04):759-764.
[3]傅骏,殷国富,王泽忠.在铸造生产中应用3D打印技术发展展望[J].装备制造与教育,2014,(02):53-56.
[4]李哲,李栋,苗润青.用3D打印技术改进430B型滑鞍铸件质量[J].现代铸铁,2018,(01):40-41.
[5]尚红标,王跃,刘旭飞,等.缸体铸件砂型的3D打印快速成型技术及应用[J].现代铸铁,2018,(01):70-72.
[6]李栋,唐昆贵,孟庆文,等.3D打印技术在气缸盖铸件生产上的应用[J].现代铸铁,2018,(02):17-19.
[7]耿佩.浅析3D打印技术在铸造成形中的应用[J].中国铸造装备与技术,2016,(01):8-9.
[8]刘海舟,李文仲,林兆富.3D打印技术在铸造砂型(芯)量产上的发展与应用[A].2016重庆市铸造年会论文集[C].重庆:重庆市铸造学会,2016.
[9]于彦奇.3D打印技术的最新发展及在铸造中的应用[J].铸造设备与工艺,2014,(02):1-4.
[10]王雪莹.3D打印技术与产业的发展及前景分析[J].中国高新技术企业,2012,(26):3-5.
[2]张渝.3D打印技术及其在快速铸造成形中的应用[J].铸造技术,2016,(04):759-764.
[3]傅骏,殷国富,王泽忠.在铸造生产中应用3D打印技术发展展望[J].装备制造与教育,2014,(02):53-56.
[4]李哲,李栋,苗润青.用3D打印技术改进430B型滑鞍铸件质量[J].现代铸铁,2018,(01):40-41.
[5]尚红标,王跃,刘旭飞,等.缸体铸件砂型的3D打印快速成型技术及应用[J].现代铸铁,2018,(01):70-72.
[6]李栋,唐昆贵,孟庆文,等.3D打印技术在气缸盖铸件生产上的应用[J].现代铸铁,2018,(02):17-19.
[7]耿佩.浅析3D打印技术在铸造成形中的应用[J].中国铸造装备与技术,2016,(01):8-9.
[8]刘海舟,李文仲,林兆富.3D打印技术在铸造砂型(芯)量产上的发展与应用[A].2016重庆市铸造年会论文集[C].重庆:重庆市铸造学会,2016.
[9]于彦奇.3D打印技术的最新发展及在铸造中的应用[J].铸造设备与工艺,2014,(02):1-4.
[10]王雪莹.3D打印技术与产业的发展及前景分析[J].中国高新技术企业,2012,(26):3-5.