基于HCNR201漏电保护电路的设计

详细信息    查看全文 | 推荐本文 |

英文篇名：Design of Leakage Protection Circuit Based on HCNR201 作者：唐会成 英文作者：TANG Hui-Cheng;Taiyuan Research Institute Ltd.of China Coal Technology and Engineering Group Corporation; 关键词：附加直流 ; 漏电保护 ; 光耦 ; 绝缘电阻 ; HCNR201 英文关键词：additional DC;;leakage protection;;optocoupler;;insulation resistance;;HCNR201 中文刊名：JDCP 英文刊名：Development & Innovation of Machinery & Electrical Products 机构：中国煤炭科工集团太原研究院有限公司; 出版日期：2019-01-28 出版单位：机电产品开发与创新 年：2019 期：v.32;No.174 语种：中文; 页：JDCP201901011 页数：3 CN：01 ISSN：11-3913/TM 分类号：36-38

摘要

目前煤矿井下采掘设备自动化水平发展迅速,煤矿采掘设备漏电保护的可靠性问题显的越来越重要。论文中介绍了附加直流电源检测对地绝缘电阻的原理与保护方法,以及高线性模拟光电耦合器的工作原理,在此基础上提出了一种附加直流电源并可检测对地绝缘的漏电保护电路。实际测试结果表明该附加直流电源检测电路测量准确,克服传统煤矿采掘设备电气控制系统漏电闭锁保护无法检测阻值的缺点。
        At present,the automation level of underground coal mining equipment is developing rapidly,and the reliability problem of leakage protection of coal mining equipment is becoming more and more important. This paper introduces the principle and protection method of additional DC power supply to detect ground insulation resistance,and high linear analog optocoupler. Based on this principle,an additional DC power supply can be proposed and the leakage protection circuit for ground insulation can be detected. The actual test results show that the additional DC power supply detection circuit is accurate and overcomes the shortcomings of the traditional coal mining equipment electrical control system leakage lock protection can not detect the resistance value.

引文

[1]国家安全生产监督总局.煤矿安全规程[M].北京:煤炭工业出版社,2010.
    [2]王德胜.附加直流电源检测法在漏电保护中的应用[J].工况自动化,2010,2.
    [3]张宝生,王念春.基于高线性模拟光耦器件HCNR200的模拟量隔离板[J].仪表技术,2005,5.
    [4]高赟.一种附加直流电源漏电保护器的研制[J].工矿自动化,2010,4.
    [5]赵建文,李科,随晓娜,等.矿井电网漏电保护新方法[J].工况自动化,2016,2.