基于键合图理论的斜直井管柱上扣/卸扣系统设计与仿真

详细信息    查看全文 | 推荐本文 |

英文篇名：Modeling and Simulation of String Make-up and Break-out System of Slant Drilling Based on Bond Graph 作者：任福深 ; 陈素丽 ; 王威 英文作者：Ren Fushen;Chen Suli;Wang Wei;Northeast Petroleum University;China Petroleum Pipeline Bureau; 关键词：顶驱 ; 轨道钳 ; 键合图 ; 仿真 英文关键词：top drive;;track clamp;;power bond graph;;simulation 中文刊名：ZGJX 英文刊名：China Mechanical Engineering 机构：东北石油大学;中国石油天然气管道局; 出版日期：2014-01-26 18:31 出版单位：中国机械工程 年：2014 期：v.25;No.387 基金：国家自然科学基金资助项目(N11372071);; 中国博士后科学基金资助项目(2013M541339);; 国家科技支撑计划资助项目(2012BAH28F03);; 黑龙江省科技攻关项目(GZ11A405) 语种：中文; 页：ZGJX201403023 页数：6 CN：03 ISSN：42-1294/TH 分类号：124-129

摘要

针对斜直井齿轮齿条钻机的管柱自动处理问题,采用顶驱和轨道钳联合作业的方式,设计了一套能够实现管柱紧扣、冲扣和旋扣等动作的自动化作业装置及其液压控制系统。采用键合图理论,建立了动力水龙头旋扣系统和轨道钳系统的键合图模型,并推导出每个键合图模型的系统动态方程。基于20-sim仿真平台,对键合图模型进行了动态仿真分析,通过对比分析,验证了各键合图模型的合理性,为斜直井石油钻机上扣/卸扣机构系统的研制提供技术支持和理论指导。
        For string automatic processing problems of the gear rack drilling rig for slant well, through the top drive and track clamp joint practices,an automated device was devised,which could fulfill the need of the make-up and break-out and spinner action,and hydraulic control system was designed.The bond graph theory was applied to design the bond graph model of the power head spin buckle system and the track clamp system,and the state equations of system were derived from bond graph model.In the 20-sim software,the dynamic simulation analysis was carried out and the simulation parameters of the bond graph element were calculated,the rationality of the model was validated through comparative analysis,which provides technical support and theoretical guidance for the research of the make-up and break-out equipment of the oil drilling rig for slant well.

引文

[1]Richard D.The Next Major Step in Total Handsfree Pipe Handing-no Derrickm an in Derrick Racking and Unracking Pipe[C]//IADC/SPE Drilling Conference.Amsterdam,The Netherlands,2007:20-22.
    [2]潘亚东.键合图概论[M].重庆:重庆大学出版社,1990.
    [3]张尚才.工程系统的键合图模拟和仿真[M].北京:机械工业出版社,1993.
    [4]任锦堂.键合图理论与应用[M].上海:上海交通大学出版社,1992.
    [5]孙伟,董荣梅,许焕卫.基于键合图的风电齿轮传动系统稳健优化设计[J].中国机械工程,2009,20(21):2549-2553.Sun Wei,Dong Rongmei,Xu Huanwei.Robust Optimization Design of the Gear Transmission of Wind Turbine Based on Bond Graph[J].China Mechanical Engineering,2009,20(21):2549-2553.
    [6]王中双.键合图理论及其在系统动力学中的应用[M].哈尔滨:哈尔滨工程大学出版社,2007.
    [7]王中双,陆念力,徐长顺.平面柔性多体系统完全动力学问题的回转键合图法[J].中国机械工程,2005,16(23):2093-2097.Wang Zhongshuang,Lu Nianli,Xu Changshun.Gyrobondgraph Method for Complete Dynamic Problem of Planar Flexible Multi-body Systems[J].China Mechanical Engineering,2005,16(23):2093-2097.
    [8]王中双,陆念力.基于键合图的多体系统耦合动力学的发展及现状[J].中国机械工程,2007,18(17):2137-2141.Wang Zhongshuang,Lu Nianli.Development and Present Status of Coupling Dynamics for Multibody Systems Based on Bond Graphs[J].China Mechanical Engineering,2007,18(17):2137-2141.