集成管理系统在飞机装配柔性工装上的应用

详细信息    查看全文 | 推荐本文 |

英文篇名：Application of Integrated Management System in Aircraft Assembly Flexible Tooling 作者：王巍 ; 王诚鑫 ; 周天一 英文作者：WANG Wei;WANG Chengxin;ZHOU Tianyi;Aerospace Engineering College, Shenyang Aerospace University; 关键词：柔性工装 ; 飞机装配 ; 信息管理 ; 集成管理系统 英文关键词：Flexible tooling;;Aircraft assembly;;Information management;;Integrated management system 中文刊名：HKGJ 英文刊名：Aeronautical Manufacturing Technology 机构：沈阳航空航天大学航空航天工程学部; 出版日期：2019-07-01 出版单位：航空制造技术 年：2019 期：v.62 语种：中文; 页：HKGJ201913020 页数：6 CN：13 ISSN：11-4387/V 分类号：89-93+98

摘要

采用柔性工装对飞机零组件进行装配,会产生巨大的信息量,为提高飞机装配过程的信息管理的质量与效率,目前采用集成管理系统对飞机装配柔性工装进行控制与管理,来实现飞机装配过程的集成化。对集成管理系统在飞机装配柔性工装上的应用进行研究,首先对集成管理系统的构架、数据格式以及通信接口等进行概述;之后对柔性工装的数据传输与调形驱动过程进行分析,对飞机柔性装配技术体系进行总结;最后对集成管理系统在柔性工装上的应用现状进行研究。研究表明,集成管理系统可以提高柔性工装的装配效率与信息管理质量。
        To improve the quality and efficiency of the information management of aircraft assembly process,the integrated management system is used to control and manage the aircraft assembly flexible assembly to realize the integration of aircraft assembly process. In this paper, the integrated management system in the application of flexible aircraft assembly fixtures, the architecture of integrated management system, data format and communication interface are summarized, such as data transmission and adjustment of flexible fixture after driving process is analyzed, and to summarize the plane flexible assembly technology system, finally, the present situation of the application of integrated management system on the flexible fixture were studied. Through the research, the integrated management system can improve the assembly efficiency and information management quality of flexible tooling.

引文

[1]黄阳华.德国“工业4.0”计划及其对我国产业创新的启示[J].经济社会体制比较,2015(2):1-10.HUANG Yanghua. German “Industry 4.0” plan and its enlightenment to China's industrial innovation[J].Comparison of Economic and Social Systems,2015(2):1-10.
    [2]冯子明.飞机数字化装配技术[M].北京:航空工业出版社,2015.FENG Ziming.Aircraft digital assembly technology[M].Beijing:Aviation Industry Press,2015.
    [3]武锋锋,李东升,王亮.面向机身柔性装配的在线编程技术[J].北京航空航天大学学报,2015,41(4):641-648.WU Fengfeng,LI Dongsheng,WANG Liang.On-line programming technology for flexible assembly of airframe[J].Journal of Beijing University of Aeronautics and Astronautics,2015,41(4):641-648.
    [4]李西宁,胡匡植,李维亮,等.飞机数字化柔性装配工装技术[J].航空制造技术,2013,56(12):40-43.LI Xining,HU Kuangzhi,LI Weiliang,et al.Aircraft digital flexible assembly tooling technology[J].Aeronautical Manufacturing Technology,2013,56(12):40-43.
    [5]万世明,陈亚丽,肖爽,等.基于行列式柔性工装快速重构方法的研究[J].航空制造技术,2015,58(19):80-82.WAN Shiming,CHEN Yali,XIAO Shuang,et al.Research on fast reconstruction method based on determinant flexible tooling[J].Aeronautical Manufacturing Technology,2015,58(19):80-82.
    [6]郭洪杰.飞机大部件自动对接装配技术[J].航空制造技术,2013,56(13):72-75.GUO Hongjie.Automatic docking assembly technology for large aircraft parts[J].Aeronautical Manufacturing Technology,2013,56(13):72-75.
    [7]王亮,李东升.飞机数字化装配柔性工装技术体系研究[J].航空制造技术,2012,55(7):34-39.WANG Liang,LI Dongsheng.Research on the technology system of aircraft digital assembly flexible tooling[J].Aeronautical Manufacturing Technology,2012,55(7):34-39.
    [8]张尧.某型飞机尾段装配工艺性及容差分析研究[D].沈阳:沈阳航空航天大学,2014.ZHANG Yao.Research on assembly process and tolerance analysis of a certain type of aircraft tail section[D].Shenyang:Shenyang Aerospace University,2014.