基于平面与剖面相资料建立储层三维精细地质模型——以鄂尔多斯盆地S区块为例
|
摘要
为精细表征鄂尔多斯盆地S区块不同沉积微相环境下储层砂体在平面及垂向上的展布规律,综合利用沉积平面相与单井剖面相资料,采用序贯指示模拟算法计算储层的三维精细相模型,再根据相模型控制采用高斯随机函数算法建立储层的属性参数模型,并对模型进行验证分析。结果表明:在相模型预测方面,工区平面上长8_2~1小层主要发育3条北东向展布的水下分流河道,东部主要发育泥质沉积;垂向上长8_2~1小层中部发育一套连片分布、稳定性好、厚度为15～30m的主力砂体,长81小层内部主要发育3套厚度为5～10m且平面上广泛发育的泥质隔夹层。在提高模型精度方面,变差函数主、次变程分析中步长取值150m可搜索到平面上任意井点的属性参数。抽稀井相模型验证可知相模型偏差率最大为6.5%,最小为0.0%,平均为3.0%,相模型精度高,为区块后期开发提供了可靠的数据基础。
In order to accurately characterize the distribution law of reservoir sand body of different sedimentary environment of S block of Ordos basin,single-well profile and areal sedimentary facies were comprehensive applied to establish the 3 Dfine facies model of reservoir by using sequential indicator simulation algorithm,then the attribute model was simulated under the control of the facies model by using gaussian random function,finally the geological model was evaluated.The results showed that:In the prediction of facies model,three north-east underwater distributary channel were developed in Chang-821 formation,the east of stratum was muddy sediment in the plane.In the profile,the main sand body with continuous distribution,good stability and thickness of 15～30 m were developed in the middle of Chang-821 formation,three sets of muddy interbed with thickness 5～10 mwere widely developed in Chang-81 formation.In order to ensure the accuracy of the model,appropriate lag distance which is 150 min variogram function setting of major and minor direction could search any well points parameters in the plane.It is proved that the maximum deviation rate of the facies model is 6.5%,the minimum is 0%,the average is 3% by using vacuate well pattern,the accuracy of facies model is high precision,the reliable data bases for the later oilfield development are provided.
In order to accurately characterize the distribution law of reservoir sand body of different sedimentary environment of S block of Ordos basin,single-well profile and areal sedimentary facies were comprehensive applied to establish the 3 Dfine facies model of reservoir by using sequential indicator simulation algorithm,then the attribute model was simulated under the control of the facies model by using gaussian random function,finally the geological model was evaluated.The results showed that:In the prediction of facies model,three north-east underwater distributary channel were developed in Chang-821 formation,the east of stratum was muddy sediment in the plane.In the profile,the main sand body with continuous distribution,good stability and thickness of 15～30 m were developed in the middle of Chang-821 formation,three sets of muddy interbed with thickness 5～10 mwere widely developed in Chang-81 formation.In order to ensure the accuracy of the model,appropriate lag distance which is 150 min variogram function setting of major and minor direction could search any well points parameters in the plane.It is proved that the maximum deviation rate of the facies model is 6.5%,the minimum is 0%,the average is 3% by using vacuate well pattern,the accuracy of facies model is high precision,the reliable data bases for the later oilfield development are provided.
引文
[1]刘伟,刘红岐,李建萍,等.PETREL软件在油藏储层地质建模中的应用实例[J].国外测井技术,2010,20(1):20-21.
[2]易萍,吴育鹏,何汶锶.浅析沉积相与成岩相结合的三维地质模型建立[J].中国石油和化工标准与质量,勘探开发,2013(13):134.
[3]罗荣涛,陈杰.基于岩相建模的沉积相划分方法:以东营凹陷东部沙三中为例[J].油气地球物理,2016,14(1):12-16.
[4]王国臣.井震结合相控储层建模在肇源南的应用[J].大庆石油地质与开发,2014,33(6):145-150.
[5]潘少伟,王家华,杨少春,等.基于多点地质统计学方法的岩相建模研究[J].科学技术与工程,2012,12(12):2805-2808.
[6]尹楠鑫,张吉,李存贵,等.改进的基于目标的高精度沉积微相建模方法在苏14加密实验区的应用[J].成都理工大学学报(自然科学版),2017,44(1):76-85.
[7]张宇,严耀祖,尹寿鹏.沉积相与岩相结合的三维地质模型建立[J].中国海上油气,2012,12(6):38-40.
[8]梁卫卫,党海龙,杜林徽,等.鄂尔多斯盆地富县地区长8油层组储层特征及控制因素研究[J].石油地质与工程,2015,29(6):57-59.
[9]梁卫卫,崔鹏兴,孙景丽,等.鄂尔多斯盆地水磨沟区块长8油层组沉积特征研究[J].石油地质与工程,2017,31(6):12-14.
[10]段天向,刘晓梅,张亚军,等.Petrel建模中的几点认识[J].岩性油气藏,2007,19(2):102-107.
[11]王家华,刘倩.储层建模中对变差函数分析的几点认识[J].石油化工应用,2011,30(10):5-7.
[12]何星,杨友运,李映雁.二维趋势面约束法在富县地区长8油层组地质建模中的应用[J].岩性油气藏,2012,24(1):100-104.
[2]易萍,吴育鹏,何汶锶.浅析沉积相与成岩相结合的三维地质模型建立[J].中国石油和化工标准与质量,勘探开发,2013(13):134.
[3]罗荣涛,陈杰.基于岩相建模的沉积相划分方法:以东营凹陷东部沙三中为例[J].油气地球物理,2016,14(1):12-16.
[4]王国臣.井震结合相控储层建模在肇源南的应用[J].大庆石油地质与开发,2014,33(6):145-150.
[5]潘少伟,王家华,杨少春,等.基于多点地质统计学方法的岩相建模研究[J].科学技术与工程,2012,12(12):2805-2808.
[6]尹楠鑫,张吉,李存贵,等.改进的基于目标的高精度沉积微相建模方法在苏14加密实验区的应用[J].成都理工大学学报(自然科学版),2017,44(1):76-85.
[7]张宇,严耀祖,尹寿鹏.沉积相与岩相结合的三维地质模型建立[J].中国海上油气,2012,12(6):38-40.
[8]梁卫卫,党海龙,杜林徽,等.鄂尔多斯盆地富县地区长8油层组储层特征及控制因素研究[J].石油地质与工程,2015,29(6):57-59.
[9]梁卫卫,崔鹏兴,孙景丽,等.鄂尔多斯盆地水磨沟区块长8油层组沉积特征研究[J].石油地质与工程,2017,31(6):12-14.
[10]段天向,刘晓梅,张亚军,等.Petrel建模中的几点认识[J].岩性油气藏,2007,19(2):102-107.
[11]王家华,刘倩.储层建模中对变差函数分析的几点认识[J].石油化工应用,2011,30(10):5-7.
[12]何星,杨友运,李映雁.二维趋势面约束法在富县地区长8油层组地质建模中的应用[J].岩性油气藏,2012,24(1):100-104.
© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号 地址：北京市海淀区学院路29号 邮编：100083 电话：办公室：(+86 10)66554848；文献借阅、咨询服务、科技查新：66554700 |