IEC 60871-1第4版与第3版的主要差异及其分析
|
摘要
介绍了国际标准IEC 60871—1第4版对第3版修订的主要内容,通过对比,说明和分析了两者的主要差异,以期有助于更好地理解、贯彻执行该标准;针对这一版标准中一些值得商榷的内容,提出了作者的见解及改正的建议,以供采用该标准、编制与此相关的国家或行业标准及日后修订IEC新标准时参考。
The main changes of the edition 4.0 relative to the edition 3.0 of IEC 60871-1 are introduced.The main differences between them are explained and analyzed through comparison so as to understand and implement the standard well. As for some contents needing discussion in the edition 4.0,both the idea and improvement suggestion from the authors are proposed so as to provide references for adopting this standard,compiling national and industrial standard related to it as well as revising new IEC standard in the future.
The main changes of the edition 4.0 relative to the edition 3.0 of IEC 60871-1 are introduced.The main differences between them are explained and analyzed through comparison so as to understand and implement the standard well. As for some contents needing discussion in the edition 4.0,both the idea and improvement suggestion from the authors are proposed so as to provide references for adopting this standard,compiling national and industrial standard related to it as well as revising new IEC standard in the future.
引文
[1] Shunt capacitor for a. c. power systems having a rated voltage above 1 000 V-Part 1:General:IEC 60871-1:2014[S].2014.
[2] Shunt capacitor for a. c. power systems having a rated voltageabove 1 000 V-Part 1:General:IEC 60871-1:2005[S].2005.
[3] High-voltage test techniques-Part 1:General definitions and test requirement:IEC 60060-1:2010[S]. 2010.
[4] Insulation coordination-Part 2:Application guide:IEC 60071-2:1996[S]. 1996.
[5] Insulation coordination-Part 1:Definitions,principles and rules:IEC 60071-1:2006[S]. 2006.
[6] Shunt capacitor for a. c. power systems having a rated voltage above 1 000 V-Part 2:Endurance testing:IEC/TS 60871-2:1999[S]. 1999.
[7]宋森,电力行业电力电容器标准化技术委员会.并联电容器装置技术及应用[M].北京:中国电力出版社,2011.
[8]谷定燮,李小玲,王善钧,等.并联电容器组向故障电容器放电的能量研究[J].电力电容器,1991(2):1-5.
[9] Selection and dimensioning of high-voltage insulators intended for use in polluted conditions:IEC/TS 60815-1-3:2008[S]. 2008.
[10] Guide for the selection of insulators in respect of polluted conditions:IEC 815:1986[S]. 1986.
[11] High-voltage fuses for the external protection of shunt capacitor:IEC 60549:1976[S]. 1976.
[12] Instrument transformers-Part 3:Additional requirements for inductive voltage transformers:IEC 61869-3:2011[S].2011.
[13]高压并联电容器用放电线圈使用技术条件:DL/T 653-2009[S]. 2009.Specification of discharge coils for high voltage shunt capacitor for order:DL/T 653-2009[S]. 2009.
[14] High-voltage switchgear and controlgear-Part 100:Alternating-current circuit-breakers:IEC 62271-100:2008[S].2008.
[15]并联电容器装置设计规范:GB 50227-2017[S]. 2017.Code for design of installations of shunt capacitor:GB50227-2017[S]. 2017.
[2] Shunt capacitor for a. c. power systems having a rated voltageabove 1 000 V-Part 1:General:IEC 60871-1:2005[S].2005.
[3] High-voltage test techniques-Part 1:General definitions and test requirement:IEC 60060-1:2010[S]. 2010.
[4] Insulation coordination-Part 2:Application guide:IEC 60071-2:1996[S]. 1996.
[5] Insulation coordination-Part 1:Definitions,principles and rules:IEC 60071-1:2006[S]. 2006.
[6] Shunt capacitor for a. c. power systems having a rated voltage above 1 000 V-Part 2:Endurance testing:IEC/TS 60871-2:1999[S]. 1999.
[7]宋森,电力行业电力电容器标准化技术委员会.并联电容器装置技术及应用[M].北京:中国电力出版社,2011.
[8]谷定燮,李小玲,王善钧,等.并联电容器组向故障电容器放电的能量研究[J].电力电容器,1991(2):1-5.
[9] Selection and dimensioning of high-voltage insulators intended for use in polluted conditions:IEC/TS 60815-1-3:2008[S]. 2008.
[10] Guide for the selection of insulators in respect of polluted conditions:IEC 815:1986[S]. 1986.
[11] High-voltage fuses for the external protection of shunt capacitor:IEC 60549:1976[S]. 1976.
[12] Instrument transformers-Part 3:Additional requirements for inductive voltage transformers:IEC 61869-3:2011[S].2011.
[13]高压并联电容器用放电线圈使用技术条件:DL/T 653-2009[S]. 2009.Specification of discharge coils for high voltage shunt capacitor for order:DL/T 653-2009[S]. 2009.
[14] High-voltage switchgear and controlgear-Part 100:Alternating-current circuit-breakers:IEC 62271-100:2008[S].2008.
[15]并联电容器装置设计规范:GB 50227-2017[S]. 2017.Code for design of installations of shunt capacitor:GB50227-2017[S]. 2017.