Self-lubricate and anisotropic wear behavior of AZ91D magnesium alloy reinforced with ternary Ti_2AlC MAX phases

详细信息    查看全文 | 推荐本文 |

英文篇名：Self-lubricate and anisotropic wear behavior of AZ91D magnesium alloy reinforced with ternary Ti_2AlC MAX phases 作者：Wenbo ; Yu ; Deqiang ; Chen ; Liang ; Tian ; Hongbin ; Zhao ; Xiaojun ; Wang 英文作者：Wenbo Yu;Deqiang Chen;Liang Tian;Hongbin Zhao;Xiaojun Wang;Center of Materials Science and Engineering, School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University;National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology;Department of Materials Science and Engineering, University of Michigan;State Key Laboratory of Advanced Materials for Smart Sensing, General Research Institute for Nonferrous Metals;School of Materials Science and Engineering, Harbin Institute of Technology; 英文关键词：Ti_2AlC;;Dry sliding wear;;Magnesium alloy;;Self-lubricate ability 中文刊名：CLKJ 英文刊名：材料科学技术(英文版) 机构：Center of Materials Science and Engineering, School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University;National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology;Department of Materials Science and Engineering, University of Michigan;State Key Laboratory of Advanced Materials for Smart Sensing, General Research Institute for Nonferrous Metals;School of Materials Science and Engineering, Harbin Institute of Technology; 出版日期：2019-03-15 出版单位：Journal of Materials Science & Technology 年：2019 期：v.35 基金：supported by the National Natural Science Foundation of China (No. 51701010);; the Beijing Jiaotong University Foundation for youth scientists (No. No.2017RC013);; the Project National United Engineering Laboratory for Advanced Bearing Tribology-Henan University of Science and Technology (No. 201805);; the Beijing Government Funds for the Constructive Project of Central Universities (No. 353139535) 语种：英文; 页：CLKJ201903007 页数：10 CN：03 ISSN：21-1315/TG 分类号：49-58

摘要

The dry sliding wear behavior of Ti_2AlC reinforced AZ91 magnesium composites was investigated at sliding velocity of 0.5 m/s under loads of 10, 20, 40 and 80 N using pin-on-disk configuration against a Cr15 steel disc. Wear rates and friction coefficients were registered during wear tests. Worn tracks and wear debris were examined by scanning electron microscopy, energy dispersive X-ray spectrometry and transmission electron microscopy in order to obtain the wear mechanisms of the studied materials. The main mechanisms were characterized as the magnesium matrix oxidation and self-lubrication of Ti_2AlC MAX phase. In all conditions, the composites exhibit superior wear resistance and self-lubricated ability than the AZ91 Mg alloy. In addition, the anisotropic mechanisms in tribological properties of textured Ti_2AlC-Mg composites were confirmed and discussed.
        The dry sliding wear behavior of Ti_2AlC reinforced AZ91 magnesium composites was investigated at sliding velocity of 0.5 m/s under loads of 10, 20, 40 and 80 N using pin-on-disk configuration against a Cr15 steel disc. Wear rates and friction coefficients were registered during wear tests. Worn tracks and wear debris were examined by scanning electron microscopy, energy dispersive X-ray spectrometry and transmission electron microscopy in order to obtain the wear mechanisms of the studied materials. The main mechanisms were characterized as the magnesium matrix oxidation and self-lubrication of Ti_2AlC MAX phase. In all conditions, the composites exhibit superior wear resistance and self-lubricated ability than the AZ91 Mg alloy. In addition, the anisotropic mechanisms in tribological properties of textured Ti_2AlC-Mg composites were confirmed and discussed.

引文

[1]P.Singh,H.Pungotra,N.S.Kalsi,Mater.Today Proceed.4(2017)8971-8982.
    [2]W.J.Joost,P.E.Krajewski,Scr.Mater.128(2017)107-112.
    [3]L.Tian,A.Russell,T.Riedemann,S.Mueller,I.Anderson,Mater.Sci.Eng.A 690(2017)348-354.
    [4]W.Yu,Y.Cao,X.Li,Z.Guo,S.Xiong,J.Mater.Sci.Technol.33(2017)52-58.
    [5]H.Friedrich,S.Schumann,J.Mater,Process.Technol.117(2001)276-281.
    [6]M.P.Staiger,A.M.Pietak,J.Huadmai,G.Dias,Biomaterials 27(2006)1728-1734.
    [7]B.Song,N.Guo,T.Liu,Q.Yang,Mater.Des.62(2014)352-360.
    [8]A.R.Natarajan,E.L.S.Solomon,B.Puchala,E.A.Marquis,A.Van der Ven,Acta Mater.108(2016)367-379.
    [9]X.B.Chen,N.Birbilis,T.B.Abbott,Corrosion 67(2011),035005.
    [10]J.An,R.G.Li,Y.Lu,C.M.Chen,Y.Xu,X.Chen,L.M.Wang,Wear 265(2008)97-104.
    [11]X.J.Wang,D.K.Xu,R.Z.Wu,X.B.Chen,Q.M.Peng,L.Jin,Y.C.Xin,Z.Q.Zhang,Y.Liu,X.H.Chen,G.Chen,K.K.Deng,H.Y.Wang,J.Mater.Sci.Technol.34(2018)245-247.
    [12]F.Labib,H.M.Ghasemi,R.Mahmudi,Wear 348-349(2016)69-79.
    [13]L.Falcon-Franco,E.Bedolla-Becerril,J.Lemus-Ruiz,J.G.Gonzalez-Rodríguez,R.Guardian,I.Rosales,Compos.Part B-Eng.42(2011)275-279.
    [14]P.Seenuvasaperumal,A.Elayaperumal,R.Jayavel,Tribol.Int.111(2017)18-25.
    [15]Y.-t.Yao,L.Jiang,G.-f.Fu,L.-q.Chen,Trans.Nonferrous Met.Soc.China 25(2015)2543-2548.
    [16]I.Aatthisugan,A.Razal Rose,D.Selwyn Jebadurai,J.Magnes.Alloy 5(2017)20-25.
    [17]A.Das,S.P.Harimkar,J.Mater.Sci.Technol.30(2014)1059-1070.
    [18]J.Cao,Z.Yin,H.Li,G.Gao,X.Zhang,Ceram.Int.44(2018)1046-1051.
    [19]J.Cheng,S.Zhu,Y.Yu,J.Yang,W.Liu,J.Mater.Sci.Technol.34(2018)670-678.
    [20]Z.Sun,Int.Mater.Rev.56(2011)143-166.
    [21]Z.Feng,P.Ke,A.Wang,J.Mater.Sci.Technol.31(2015)1193-1197.
    [22]M.W.Barsoum,M.Radovic,Annu.Rev.Mater.Res.41(2011)195-227.
    [23]W.Yu,V.Mauchamp,T.Cabioc’h,D.Magne,L.Gence,L.Piraux,V.Gauthier-Brunet,S.Dubois,Acta Mater.80(2014)421-434.
    [24]M.W.Barsoum,Prog.Solid State Chem.28(2000)201-281.
    [25]G.M.Song,S.B.Li,C.X.Zhao,W.G.Sloof,S.van der Zwaag,Y.T.Pei,J.T.M.De Hosson,J.Eur.Ceram.Soc.31(2011)855-862.
    [26]X.M.Fang,X.H.Wang,H.Zhang,Y.C.Zhou,J.Mater.Sci.Technol.31(2015)125-128.
    [27]S.Myhra,J.W.B.Summers,E.H.Kisi,Mater.Lett.39(1999)6-11.
    [28]L.Cai,Z.Huang,W.Hu,S.Hao,H.Zhai,Y.Zhou,J.Adv.Ceram.6(2017)90-99.
    [29]L.Xu,D.Zhu,S.Grasso,T.S.Suzuki,A.Kasahara,M.Tosa,B.-N.Kim,Y.Sakka,M.Zhu,C.Hu,J.Adv.Ceram.6(2017)1-9.
    [30]B.Anasori,Ea.N.Caspi,M.W.Barsoum,Mater.Sci.Eng.A 618(2014)511-522.
    [31]W.Yu,X.Wang,H.Zhao,C.Ding,Z.Huang,H.Zhai,Z.Guo,S.Xiong,J.Alloys Compd.702(2017)199-208.
    [32]W.Yu,H.Zhao,X.Wang,L.Wang,S.Xiong,Z.Huang,S.Li,Y.Zhou,H.Zhai,J.Alloys Compd.730(2018)191-195.
    [33]W.Yu,V.Gauthier-Brunet,T.Cabioc’h,S.Dubois,J.Am.Ceram.Soc.97(2014)2308-2313.
    [34]W.Yu,H.Zhao,Z.Huang,X.Chen,Y.Aman,S.Li,H.Zhai,Z.Guo,S.Xiong,Mater.Charact.127(2017)53-59.
    [35]M.Moazami-Goudarzi,F.Akhlaghi,Tribol.Int.102(2016)28-37.
    [36]C.Lim,S.Lim,M.Gupta,Wear 255(2003)629-637.
    [37]S.García-Rodríguez,B.Torres,A.Maroto,A.J.López,E.Otero,J.Rams,Wear390-391(2017)1-10.
    [38]H.G.P.Kumar,M.A.Xavior,Proc.Eng.174(2017)992-999.
    [39]N.G.Jones,C.Humphrey,L.D.Connor,O.Wilhelmsson,L.Hultman,H.J.Stone,F.Giuliani,W.J.Clegg,Acta Mater.69(2014)149-161.
    [40]A.Guitton,S.Van Petegem,C.Tromas,A.Joulain,H.Van Swygenhoven,L.Thilly,Appl.Phys.Lett.104(2014)201.
    [41]A.Guitton,A.Joulain,L.Thilly,C.Tromas,Philos.Mag.92(2012)4536-4546.
    [42]C.Taltavull,B.Torres,A.J.López,J.Rams,Wear 301(2013)615-625.
    [43]J.Zhang,X.Zhang,Q.Liu,S.Yang,Z.Wang,J.Mater.Sci.Technol.33(2017)645-651.
    [44]S.Amini,C.Ni,M.W.Barsoum,Compos.Sci.Technol.69(2009)414-420.
    [45]X.J.Wang,K.Wu,W.X.Huang,H.F.Zhang,M.Y.Zheng,D.L.Peng,Compos.Sci.Technol.67(2007)2253-2260.
    [46]B.Inem,G.Pollard,J.Mater.Sci.28(1993)4427-4434.
    [47]H.Li,S.Li,X.Du,P.Bao,Y.zhou,Mater.Lett.167(2016)131-133.
    [48]G.P.Bei,G.Laplanche,V.Gauthier-Brunet,J.Bonneville,S.Dubois,J.Am.Ceram.Soc.96(2013)567-576.
    [49]W.Yu,H.Zhao,X.Hu,J.Alloys Compd.732(2018)894-901.