热式MEMS流量传感器的设计及测试

详细信息    查看全文 | 推荐本文 |

英文篇名：Design and test of thermal MEMS flow sensor 作者：胡梦飞 ; 杨露露 ; 刘亚伟 ; 谷永先 ; 胡国俊 ; 吕品 英文作者：HU Mengfei;YANG Lulu;LIU Yawei;GU Yongxian;HU Guojun;LV Pin;Industrial and Equipment Technology Research Institute,Hefei University of Technology;Microelectronics Packaging Research Center, The 38th Institute of China Electronics Technology Group Corporation; 关键词：热串扰 ; 微机电系统 ; 悬臂梁 ; 恒温差 ; 模数转换 ; 串口通信 英文关键词：Thermal crosstalk;;MEMS;;Cantilever beam;;Constant temperature difference;;Analog-digital conversion;;Serial communication 中文刊名：DYJX 英文刊名：China Metalforming Equipment & Manufacturing Technology 机构：合肥工业大学工业与装备技术学院;中国电子科技集团公司第三十八研究所微电子封装研究中心; 出版日期：2017-09-04 16:32 出版单位：锻压装备与制造技术 年：2017 期：v.52;No.310 语种：中文; 页：DYJX201704010 页数：5 CN：04 ISSN：37-1392/TG 分类号：40-44

摘要

根据已有的热式MEMS气体微流量传感器芯片的各部分热敏电阻热串扰现象严重,造成很大的测量误差,改进设计了一种MEMS热式流量传感器,将加热电阻和上下游测温电阻采用悬臂梁隔离结构,并相互隔离,有效的避免了热膜流量传感器各部分热敏电阻间相互热串扰现象。基于改进的MEMS热式流量传感器,设计了流量传感器的测试系统,包括恒温差电路、桥式测量电路及放大、滤波电路,所采集的流量信号经过滤波放大后输入AD模块进行模数转换,最后经过单片机处理,利用单片机与计算机串口通信功能,在不同流速下打印出不同的电压值;通过Matlab对所测出的数据进行拟合,完成对传感器性能的检测。测量结果表明:在一定的流量范围内,该流量传感器具有测量精度高、响应速率快、输出信号平滑等特点,能够广泛应用于工业、医疗领域的流量测量。
        The thermal resistance thermal crosstalk of various parts for original thermal MEMS gas micro-flow sensor chip has been serious, which causes a large measurement error. A kind of MEMS thermal flow sensor has been improved and designed. The heating resistor and the upstream & downstream temperature measure-ment resistors have been separated by the cantilever beam and isolated from each other, which effectively avoids the thermal crosstalk between the thermal resistors of the hot film flow sensor. On basis of the im-proved MEMS thermal flow sensor, the testing system of the flow sensor has been designed, including the constant temperature difference circuit, bridge measurement circuit & amplification, and filter circuit. The collected flow has been input into the AD module for analog-digital conversion after being filtered and am-plified. Finally, through the single-chip processing, by use of communication function between single-chip and computer serial, the different voltage values have been printed at different flow rates. The fitting has been conducted to the measured data by Matlab to complete the detection of the sensor performance. The measurement results show that the flow sensor has the characteristics of high measurement precision, fast re-sponse rate and smooth output signal in a certain flow range, which can be widely used in industrial and medical field measurement.

引文

[1]彭杰纲,周兆英,叶雄英.基于MEMS技术的微型流量计的研究进展[J],力学进展,2005,35:361-376.
    [2]徐永青,吕树海,徐爱东,等.MEMS热膜式微型流量传感器的研制[J].微纳电子技术,2010,47:228-231.
    [3]Constant Temperature Anemometer(CTA)-Functional Mechanisms,http://www.azosensors.com/article.aspx?Article ID=26.
    [4]Kaltsas G,Petropoulos A,Tsougeni K,Pagonis1 D N,Speliotis T,Gogolides E,Nassiopoulou A G..A novel microfabrication technology on organic substrates-application to a thermal flow.sensor,Journal of Physics:Conference Series,2007,92:012046.
    [5]李艳杰,齐虹.基于MEMS工艺的热膜式流量传感器芯片的研制[J].传感器与微系统,2012,31(5):82-84.
    [6]谷永先,曾鸿江,邬林,等.热隔离式MEMS气体质量流量传感器设计[J].传感器与微系统,2016,35(6):72-74.
    [7]赵文杰,施云波,罗毅,等.一种AIN基热隔离MEMS阵列风速传感器设计[J].仪器仪表学报,2012,33(12):2819-2824.
    [8]代富,高杨,官承秋,等.电阻悬浮的MEMS热膜式气体流量传感器设计[J].MEMS与传感器,2012,49(9):596-606.
    [9]Que R Y,Zhu R,Wei Q Z,Cao Z.Temperature compensation for thermal anemometers using temperature sensors independent of flow sensors.Measurement Science and Technology,2011,22(8):085404.
    [10]Sosna C,Buchner R,Lang W.A temperature compensation circuit for thermal flow sensors operated in constant temperature difference mode[J].IEEE Tansactions on Instrumentation and Measurement,2010,59(6):1715-1721.