热处理工艺对TC8M-1钛合金组织和性能的影响
|
摘要
TC8M-1钛合金是近期研制的最高使用温度达450℃的热强型、长寿命高温钛合金。对该合金进行了不同温度的固溶和时效处理,研究热处理工艺对合金显微组织和力学性能的影响。结果表明:随着固溶温度的升高,合金中等轴初生α相含量逐渐减少,β转变组织进一步粗化,合金由等轴组织转变为双态组织,合金的室温强度呈下降趋势;随着时效温度的升高,合金中等轴初生α相含量无变化,合金的室温拉伸性能稍有下降,而塑性略微增加。经920℃/2 h,AC+580℃/1 h,AC热处理后,可使合金获得较好的强度-塑性的匹配。
TC8 M-1 titanium alloy was a newly developed hot strength and long life high temperature titanium alloy,whose highest serviceability temperature can reach to 450 oC.The effect of heat treatment process on microstructure and mechanical properties of TC8 M-1 titanium alloy was studied by solution and aging treatment at different temperatures.The results show that the content of equiaxed primary α phase decreases gradually and the transformed β structure becomes coarse with the increasing of solution temperature.Meanwhile,the equiaxed microstructure transforms into duplex microstructure.Therefore,the room temperature strength presents a decrease trend.However,the content of equiaxed primary α phase changes little with the increasing of aging temperature.The tensile-strength at room temperature drops a little,but the plasticity increases slightly.After heat treatment at 920 oC/2 h,AC+580 oC/1 h,AC,the TC8 M-1 titanium alloy can obtain the optimum combination of strength with plasticity.
TC8 M-1 titanium alloy was a newly developed hot strength and long life high temperature titanium alloy,whose highest serviceability temperature can reach to 450 oC.The effect of heat treatment process on microstructure and mechanical properties of TC8 M-1 titanium alloy was studied by solution and aging treatment at different temperatures.The results show that the content of equiaxed primary α phase decreases gradually and the transformed β structure becomes coarse with the increasing of solution temperature.Meanwhile,the equiaxed microstructure transforms into duplex microstructure.Therefore,the room temperature strength presents a decrease trend.However,the content of equiaxed primary α phase changes little with the increasing of aging temperature.The tensile-strength at room temperature drops a little,but the plasticity increases slightly.After heat treatment at 920 oC/2 h,AC+580 oC/1 h,AC,the TC8 M-1 titanium alloy can obtain the optimum combination of strength with plasticity.
引文
[1]Dong Baoming(董宝明),Zhang Sheng(张胜),Guo Delun(郭德伦)et al.Titanium Alloys:Russian Aircraft and Aerospace Application(钛合金在俄罗斯飞机及航空航天上的应用)[M].Beijing:Aviation Industry Press,2008
[2]He Yu(何瑜),Wei Shouyong(魏寿庸).Titanium Industry Progress(钛工业进展)[J],2004,21(2):16
[3]Mao Xiaonan(毛小南),Zhao Yongqing(赵永庆),Yang Guanjun(杨冠军).Rare Metals Letters(稀有金属快报)[J],2007,26(5):1
[4]Wei Shouyong(魏寿庸),He Yu(何瑜),Wang Qingjiang(王清江)et al.Aero-Engine(航空发动机)[J],2005,31(1):52
[5]Xu Feng(徐锋),Yang Yi(杨义),Li Changfu(李长富)et al.Acta Metallugica Sinica(金属学报)[J],2005,41(10):1057
[6]Donachie M J.Titanium:A Technical Guide(2nd Edition)[M].Materials Park,Ohio:ASM International,2000
[7]Cai Jianming(蔡建明),Cao Chunxiao(曹春晓).Journal of Aeronautical Materials(航空材料学报)[J],2014,34(4):27
[8]Liao Mingfu(廖明夫),Tan Dali(谭大力),Geng Jianming(耿建明)et al.Journal of Aerospace Power(航空动力学报)[J],2014,29(7):1505
[9]He Pingzhi(和平志),Liu Huifang(刘惠芳),Wei Shouyong(魏寿庸)et al.Titanium Industry Progress(钛工业进展)[J],2009,26(5):18
[10]Wang K,Li M Q.Materials Science and Engineering A[J],2014,600:122
[11]Tao Hailin(陶海林),Li Geping(李阁平),Zhang Peng(张鹏)et al.China Titanium Industry(中国钛业)[J],2012(2):23
[12]Liu Huifang(刘惠芳),Li Geping(李阁平),Wei Shouyong(魏寿庸)et al.Titanium Industry Progress(钛工业进展)[J],2006,23(6):33
[13]Wang Tengfei(王腾飞),Zeng Weidong(曾卫东),Peng Wenwen(彭雯雯)et al.Hot Working Technology(热加工工艺)[J],2011,40(12):57
[14]Liu Huifang(刘惠芳),Li Geping(李阁平),He Pingzhi(和平志)et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2005,34(S3):501
[15]Valentin N.Moiseyev.Titanium Alloy:Russian Aircraft and Aerospace Applications[M].Boca Raton,Florida:CRC Press,Taylor&Francis Group,2006
[16]Feng Qiuyuan(冯秋元),Fang Bo(方波),Chen Zhiyong(陈志勇)et al.Titanium Industry Progress(钛工业进展)[J],2015,32(1):30
[17]Zhang Zhi(张智),Li Wei(李维),Liao Qiang(廖强)et al.Mechanical Engineering&Automation(机械工程与自动化)[J],2014(3):108
[2]He Yu(何瑜),Wei Shouyong(魏寿庸).Titanium Industry Progress(钛工业进展)[J],2004,21(2):16
[3]Mao Xiaonan(毛小南),Zhao Yongqing(赵永庆),Yang Guanjun(杨冠军).Rare Metals Letters(稀有金属快报)[J],2007,26(5):1
[4]Wei Shouyong(魏寿庸),He Yu(何瑜),Wang Qingjiang(王清江)et al.Aero-Engine(航空发动机)[J],2005,31(1):52
[5]Xu Feng(徐锋),Yang Yi(杨义),Li Changfu(李长富)et al.Acta Metallugica Sinica(金属学报)[J],2005,41(10):1057
[6]Donachie M J.Titanium:A Technical Guide(2nd Edition)[M].Materials Park,Ohio:ASM International,2000
[7]Cai Jianming(蔡建明),Cao Chunxiao(曹春晓).Journal of Aeronautical Materials(航空材料学报)[J],2014,34(4):27
[8]Liao Mingfu(廖明夫),Tan Dali(谭大力),Geng Jianming(耿建明)et al.Journal of Aerospace Power(航空动力学报)[J],2014,29(7):1505
[9]He Pingzhi(和平志),Liu Huifang(刘惠芳),Wei Shouyong(魏寿庸)et al.Titanium Industry Progress(钛工业进展)[J],2009,26(5):18
[10]Wang K,Li M Q.Materials Science and Engineering A[J],2014,600:122
[11]Tao Hailin(陶海林),Li Geping(李阁平),Zhang Peng(张鹏)et al.China Titanium Industry(中国钛业)[J],2012(2):23
[12]Liu Huifang(刘惠芳),Li Geping(李阁平),Wei Shouyong(魏寿庸)et al.Titanium Industry Progress(钛工业进展)[J],2006,23(6):33
[13]Wang Tengfei(王腾飞),Zeng Weidong(曾卫东),Peng Wenwen(彭雯雯)et al.Hot Working Technology(热加工工艺)[J],2011,40(12):57
[14]Liu Huifang(刘惠芳),Li Geping(李阁平),He Pingzhi(和平志)et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2005,34(S3):501
[15]Valentin N.Moiseyev.Titanium Alloy:Russian Aircraft and Aerospace Applications[M].Boca Raton,Florida:CRC Press,Taylor&Francis Group,2006
[16]Feng Qiuyuan(冯秋元),Fang Bo(方波),Chen Zhiyong(陈志勇)et al.Titanium Industry Progress(钛工业进展)[J],2015,32(1):30
[17]Zhang Zhi(张智),Li Wei(李维),Liao Qiang(廖强)et al.Mechanical Engineering&Automation(机械工程与自动化)[J],2014(3):108