可变气门正时标定在气门正时设计中的作用

详细信息    查看全文 | 推荐本文 |

英文篇名：Effect of Variable Valve Timing Calibration on Valve Timing Design 作者：晏双鹤 英文作者：YAN Shuanghe;Technical Center of Great Wall Motor Company Limited,Hebei Automobile Engineering Technology & Research Center; 关键词：气门可变正时 ; 气门正时 ; 标定 英文关键词：variable valve timing;;valve timing;;calibration 中文刊名：CYGS 英文刊名：Design and Manufacture of Diesel Engine 机构：长城汽车股份有限公司技术中心,河北省汽车工程技术研究中心; 出版日期：2019-03-25 出版单位：柴油机设计与制造 年：2019 期：v.25;No.166 语种：中文; 页：CYGS201901012 页数：4 CN：01 ISSN：31-1430/TH 分类号：55-58

摘要

以一款2. 0 L增压直喷双可变气门正时(VVT)汽油机为研究对象,在一定的工况区域进行发动机台架试验,标定VVT。试验结果表明,41%工况的进气VVT处于极限开启位置,将进气开启定时再提前,可以进一步降低燃油耗。为此,对进气气门正时进行错齿改造并试验,验证新增的进气VVT角度可以使发动机获得更好的经济性表现。试验结果表明,错齿改造使发动机燃油耗降低,说明VVT的标定结果可以对气门正时设计提出改进意见。
        The calibration of the variable valve timing( VVT) of a 2. 0 L turbocharged gasoline direct injection engine was carried out at certain operating conditions on engine test bench. The test result shows that the intake VVT reaches its Maximum opening position at 41% operating conditions,and the further advance of intake valve timing benefits fuel reduction. Then,the advance of intake valve was made by misaligning gear teeth and the verification was conducted. The results show that the expansion of intake VVT angle can make the engine achieve better economic performance,indicating that the result of VVT calibration can provide suggestion for improving valve timing design.

引文

[1] GAUTHIER D G,PFEIFFER J M. Virtual check valve control for improved energy conservation and phasing performance[R]. SAE International,2010-01-1188.
    [2]肖广飞,张弘,尹琪.车用汽油机可变气门定时技术作用机理及应用策略[J].车用发动机,2011(6):1-6.
    [3]张桐山.基于可变气门正时技术的汽油机排放性能研究[D].天津:天津大学,2008.
    [4]刘小平.可变凸轮轴配气相位机构的测试及分析[D].天津:天津大学,2008.