高压内啮合齿轮泵的测试与分析

详细信息    查看全文 | 推荐本文 |

英文篇名：Test and Analysis of High-pressure Internal Gear Pump 作者：白福团 ; 陈凯 ; 詹白勺 ; 倪君辉 英文作者：BAI Futuan;CHEN Kai;ZHAN Baishao;NI Junhui;Department of Mechanical Engineering, Taizhou University;Shanghai Electric Group Shanghai Motor Company; 关键词：内啮合齿轮泵 ; 压力脉动 ; 高压 英文关键词：Internal gear pump;;Pressure pulsation;;High pressure 中文刊名：JCYY 英文刊名：Machine Tool & Hydraulics 机构：台州学院机械工程学院;上海电气集团上海电机厂有限公司; 出版日期：2019-02-15 出版单位：机床与液压 年：2019 期：v.47;No.477 基金：台州市科技计划项目(15gy51;1701gy22) 语种：中文; 页：JCYY201903020 页数：4 CN：03 ISSN：44-1259/TH 分类号：108-110+116

摘要

基于所构建的液压泵综合试验台,对高压内啮合齿轮泵的排量、功率、流量、效率等性能进行了测试与分析,特别对内啮合齿轮泵在高压下的工作特性进行了测试,分析了其高压下的压力脉动特性,为内啮合齿轮泵的研究提供了依据。
        Based on the built synthetic hydraulic pump test-bed, the performance of the high pressure internal gear pump including swept volume, power, flow rate and efficiency was tested and analyzed. In particular, the work characteristic of the internal gear pump at high pressure was examined, and the pressure pulsation at high pressure was analyzed, which provides the practical evidence for the research of internal gear pump.

引文

[1] 刘迎圆,朱祖超.高压内啮合齿轮泵的三维CFD数值计算与试验研究[J].流体机械,2016,44(12):5-10.LIU Y Y,ZHU Z C.3D Numerical and Experimental Studies on Hydraulic Performances of an Internal Gear Pump with a High-pressure[J]. Fluid Machinery,2016,44(12):5-10.
    [2] 徐学忠,张凯,谭翰墨.直线共轭内啮合齿轮泵的啮合特性分析[J].机床与液压,2011,39(7):48-50.XU X Z,ZHANG K,TAN H M.Research on Mesh Characteristic of Straight Conjugated Internal Gear Pump[J].Machine Tool & Hydraulics,2011,39(7):48-50.
    [3] 杨国来,白桂香.基于啮合角函数的直线共轭内啮合齿轮泵齿廓方程[J].液压与气动,2012(7):39-41.YANG G L,BAI G X.The Tooth Profile Equation of Straight Conjugate Internal Gear Pump Based on Pressure Angle Function[J].Chinese Hydraulics & Pneumatics,2012(7):39-41.
    [4] 李东泽,陈诚,梁瑞涛,等.渐开线内啮合齿轮泵的流量特性及其参数分析[J].舰船电子工程,2014(11):149-153.LI D Z,CHEN C,LIANG R T,et al.Involute Internal Gear Pump-flow Characteristics and Parameter Analysis[J]. Ship Electronic Engineering,2014(11):149-153.
    [5] 王仲伟,崔建昆,张丽华.直线共轭内啮合齿轮泵的瞬时流量分析[J].流体传动与控制,2013(4):23-26.WANG Z W,CUI J K,ZHANG L H.Analysis of Instantaneous Flow in Internal Gear Pump with Straight Line Conjugated Tooth[J].Fluid Power Transmission and Control,2013(4):23-26.
    [6] 刘志刚,郭名海,孔凡忠,等.基于几何参数的IPH型内啮合齿轮泵流量脉动的研究[J].液压与气动,2012(1):95-97.LIU Z G,GUO M H,KONG F Z,et al.Study of Flow Pulsation for IPH Internal Gear Pump Based on Geometric Parameters[J].Chinese Hydraulics & Pneumatics,2012(1):95-97.
    [7] 王乐勤,苗天丞,张菲茜.高压渐开线内啮合齿轮泵轴向泄漏分析[J].排灌机械工程学报,2013,31(11):928-932.WANG L Q,MIAO T C,ZHANG F X.Analysis of Axial Leakage in High Pressure Involute Internal Gear Pump[J].Journal of Drainage and Irrigation Machinery Engineering,2013,31(11):928-932.
    [8] 李宏伟,杨成.基于ANSYS的内啮合齿轮泵壳体有限元分析及优化[J].液压与气动,2011(2):32-35.LI H W,YANG C.The Finite Element Analysis and Optimization of Shell for Internal Gear Pump Based on ANSYS[J].Chinese Hydraulics & Pneumatics,2011(2):32-35.
    [9] 杨国来,陈萍,李世伟.直线共轭内啮合齿轮泵泵轴动态分析[J].液压与气动,2014(2):91-93.YANG G L,CHEN P,LI S W.Dynamic Analysis on Shaft of Straight Conjugate Internal Gear Pump[J].Chinese Hydraulics & Pneumatics,2014(2):91-93.
    [10] 袁丹青,康仕彬,丛小青,等.直线共轭内啮合齿轮泵齿轮接触强度的有限元分析[J].排灌机械工程学报,2009,27(2):111-114.YUAN D Q,KANG S B,CONG X Q,et al.Finite Element Analysis on Gear Tangency Stress of Straight Conjugate Internal Gear[J].Journal of Drainage and Irrigation Machinery Engineering,2009,27(2):111-114.
    [11] 祁仁俊.液压系统压力脉动的机理[J].同济大学学报,2001,29(9):1017-1022.QI R J.Mechanism Research of Pressure Ripple for Hydraulic Systems[J].Journal of Tongji University,2001,29(9):1017-1022.