摘要
为解决四川某金矿选厂对该地区金矿回收率较低的问题,对该金矿进行了全面的矿石性质分析研究,并根据矿石性质的特点研究了回收该矿石中有用矿物的最佳工艺流程方案,并进行了多方案选矿对比试验。通过柱浸试验、浮选试验、重选试验、全泥氰化浸出试验的选金工艺方案对比试验结果表明:该矿可浸性很好,浸出试验金浸出率大于97%,重选、浮选回收率较低,最终确定了氰化浸出工艺流程。该工艺流程简单,可操作性强,对该地区的金矿回收具有指导作用。
To solve the problem of low recovery rate of gold mine in a gold mine selection plant in Sichuan, a comprehensive analysis of ore properties is carried out for the gold deposit. According to the characteristics of ore properties, the optimum process scheme for recovering useful minerals in the ore was studied, and the comparison test of multi scheme mineral processing was carried out. Through the column leaching test, floatation test, reelection test and full mud cyanide leaching test, the comparison test results show that the ore is very impregnable, the leaching rate of the leaching test is more than 97%, and the recovery rate of the flotation and gravity are low. The process is simple and easy to operate, and has a guiding role in the recovery of gold deposits in this area.
引文
[1]邵军.中国石英脉型金矿床地质特征[J].贵金属地质,1998,7(3):172-179.
[2]邵晓东,李景春.中国金矿床主要工业类型及其分布特征[J].贵金属地质,2000,9(3):166-170.
[3]侯凯,谢贤,童雄,等.我国金矿床的工业类型及选矿研究方法[J].矿产综合利用,2014(4):9-14.
[4]肖骏,房朝军,陈代雄,等.河南某石英脉型金矿选矿技术[J].矿产综合利用,2018,8(4):73-77.
[5]王作兴.捕收剂在自然金表面吸附的电化学机理研究[D].长沙:中南大学,2012.
[6]陈代雄,肖骏,杨建文.提高矽卡岩型多金属硫化矿伴生贵金属回收的研究[J].有色金属:选矿部分,2014(5):53-57.
[7]黄万抚,吴浩,文金磊,等.Knelson离心机的分选原理及应用研究[J].矿山机械,2015,(11):96-100.