轻压下管线钢连铸板坯的原位统计分布分析

详细信息    查看全文 | 推荐本文 |

英文篇名：Original position statistic distribution analysis of pipeline steel continuous casting slab in soft reduction 作者：张婷婷 英文作者：ZHANG Ting-ting;Pangang Group Research Institute Co.,Ltd.,State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization; 关键词：加压分配位置 ; 原位统计分布分析 ; 管线钢板坯 ; 偏析 ; 致密度 英文关键词：pressure distribution location;;original position statistic distribution analysis;;pipeline steel slab;;segregation;;density 中文刊名：YJFX 英文刊名：Metallurgical Analysis 机构：攀钢集团研究院有限公司,钒钛资源综合利用国家重点实验室; 出版日期：2017-05-27 14:46 出版单位：冶金分析 年：2017 期：v.37 语种：中文; 页：YJFX201705003 页数：6 CN：05 ISSN：11-2030/TF 分类号：24-29

摘要

针对轻压下两种不同加压分配位置,采用原位统计分布分析方法对两炉管线钢板坯的偏析和致密度进行了对比分析。方法定量检测出了管线钢板坯的偏析和疏松部位及变化情况,从板坯不同部位碳元素分布和致密度的二维等高图中,可以直观地呈现出板坯的缺陷和疏松情况。实验结果表明,连铸过程中,在钢水成分、中包温度、过热度、拉速、压下量均相同,压下分配位置不同的条件下,试验样品中碳元素的偏析和致密度有所不同,不同的压下位置能够改善板坯偏析和致密度,进而提高板坯的质量。
        In terms of two different pressure distribution locations in soft reduction,the segregation and density of pipeline steel slab from two furnaces were compared by original position statistic distribution analysis.The segregation,loose part and their variation in pipeline steel slab were quantitatively detected.The defects and porosity of slab could be intuitively presented from the two-dimensional contour map of carbon distribution and density.The experimental results indicated that the steel composition,tundish temperature,degree of superheat,drawing speed and reduction quantity were same in continuous casting process.When the distribution locations in soft reduction were different,the segregation and density of carbon in testing samples were also different.The segregation and density of slab could be improved by various reduction locations,thus improving the quality of the slab.

引文

[1]王久彬,张富强.连铸坯凝固过程的溶质偏析[J].鞍钢技术,1997(11):60-63.WANG Jiu-bin,ZHANG Fu-qiang.Solute segregation in the solidification proeess of continuous cast slab and billet[J].Angang Technology,1997(11):60-63.
    [2]沈峰,唐红伟,吴夜明,等.轴承钢连铸坯偏析和致密度的分析[J].宽厚板,2007,13(1):31-35.SHEN Feng,TANG Hong-wei,WU Ye-ming,et al.Analysis of segregation and density on continuous casting bloom of bearing steel[J].Wide and Heavy Palte,2007,13(1):31-35.
    [3]王克杰,李维.原位统计分布分析技术在连铸板坯成分偏析检测方法中的应用[J].冶金分析,2012,32(1):7-14.WANG Ke-jie,LI Wei.Application of original position statistic distribution analysis technique in composition segregation detection of continuous casting slab[J].Metallurgical Analysis,2012,32(1):7-14.
    [4]李金波,胡志刚,杜琦铭.利用直读光谱仪检测铸坯偏析的探索与实践[J].中国冶金,2011,21(12):54-59.LI Jin-bo,HU Zhi-gang,DU Qi-ming.Research and practice of detection of slab segregation with direct reading spectrometer[J].China Metallurgy,2011,21(12):54-59.
    [5]吴红家.连铸方坯低倍缺陷成因分析[J].鄂钢科技(Egang Science&Technology),2010(2):24-28.
    [6]王海舟.原位统计分布分析―材料研究及质量判据的新技术[J].中国科学:B辑(Science in China:Series B),2002,32(6):481-484.
    [7]中国分析测试协会.中国分析测试协会科学技术奖发展回顾[M].北京:北京科学技术出版社,2015.
    [8]侯自兵,成国光.特殊钢连铸方坯中心区域宏观偏析定量化模型研究[J].连铸,2011(S1):306-311.HOU Zi-bing,CHENG Guo-guang.Quantitative model on central region macrosegregation of continuously cast billet of special steel[J].Continuous Casting,2011(S1):306-311.