薄煤层无轨胶轮车开发设计研究
|
摘要
为了适应现代化薄煤层煤矿无轨辅助运输的生产需要,开发设计了一种适用于巷道高度2 m左右的薄煤层无轨胶轮车。该车型整车高度1550 mm,采用平推自卸车厢,前后车架中央铰接,由防爆柴油机、进气系统、排气系统、冷却系统组成的防爆动力系统,液力-机械传动,四轮驱动,安全失效型行车制动系统和二合一的紧急与停车制动系统。该车型具有安全、高效的特点,可满足薄煤层煤矿无轨辅助运输的要求。
In order to meet the production needs of trackless auxiliary transportation in modern thin coal seam coal mines, a thin coal seam trackless rubber tire vehicle suitable for roadway height of about 2 m is developed and designed. The vehicle has a height of 1550 mm and is equipped with a flat-pushing dump truck. The front and rear frames are hinged at the center. The explosion-proof power system consists of explosion-proof diesel engine, intake system, exhaust system and cooling system. Hydraulic-mechanical transmission, four-wheel drive, safety-deactivated service brake system and 2-in-1 emergency and parking brake system. The model is safe and efficient, and can meet the requirements of trackless auxiliary transportation in thin coal seam coal mines.
In order to meet the production needs of trackless auxiliary transportation in modern thin coal seam coal mines, a thin coal seam trackless rubber tire vehicle suitable for roadway height of about 2 m is developed and designed. The vehicle has a height of 1550 mm and is equipped with a flat-pushing dump truck. The front and rear frames are hinged at the center. The explosion-proof power system consists of explosion-proof diesel engine, intake system, exhaust system and cooling system. Hydraulic-mechanical transmission, four-wheel drive, safety-deactivated service brake system and 2-in-1 emergency and parking brake system. The model is safe and efficient, and can meet the requirements of trackless auxiliary transportation in thin coal seam coal mines.
引文
[1]戴绍诚,李芬.我国煤矿辅助运输系统的重大改革-大柳塔煤矿辅助运输实现无轨化[J].煤矿设计,1997(7):23-27.
[2]王安.现代化亿吨矿区生产技术[M].北京:煤炭工业出版社,2005.
[3]王艳军.我国综采工作面设备搬家现状及发展趋势[J].煤炭技术,2010,29(4):7-9.
[4]陈贤忠.我国无轨胶轮车辅助运输的回顾与展望[J].煤矿机械,2011,32(3):3-5.
[5]郎国军,苑雪涛,严海纲.薄煤层开采技术的新趋势[J].煤矿机械,2011,32(6):1-2.
[6]张武东,冯振忠,张建荣.浅析薄煤层采煤机现状及发展方向[J].矿山机械,2011,39(2):23-26.
[7]崔新霞,杜长龙.薄煤层采煤机新型截割部及其动态仿真[J].矿山机械,2011,39(11):1-4.
[8]饶俊良,胡晓辉,陈毅培.基于Solid Works的支架搬运车铲板有限元分析与改进研究[J].矿山机械,2012,40(12):36-39.
[9]刘梅云.WC24RE薄煤层无轨胶轮人车[J].煤矿机械,2010,31(5):125-126.
[10]刘梅云.WJ-4FB煤矿低矮型防爆柴油机铲运车[J].煤矿机械,2010,31(3):147-149.
[11]刘梅云.WCQ-5防爆工程车[J].江西煤炭科技,2010(1):65-67.
[12]张秋根,饶俊良.WJ-6FB防爆多功能柴油铲运机概述[J].矿山机械,2010,38(11):35-38.
[13]饶俊良,汪达勇.防爆胶轮车传动桥摆动架有限元分析[J].机械工程师,2015(9):90-91.
[14]饶俊良,汪达勇.防爆工程车刚-柔耦合虚拟样机关键技术研究[J].机械工程师,2015(2):146-147.
[15]胡晓辉,饶俊良,陈毅培.基于虚拟样机的防爆胶轮车轻量化研究[J].煤矿机械,2014,35(6):58-60.
[16]钟勋,饶俊良.基于虚拟样机的防爆铲运机前机架有限元分析研究[J].煤矿机械,2014,35(4):98-99.
[2]王安.现代化亿吨矿区生产技术[M].北京:煤炭工业出版社,2005.
[3]王艳军.我国综采工作面设备搬家现状及发展趋势[J].煤炭技术,2010,29(4):7-9.
[4]陈贤忠.我国无轨胶轮车辅助运输的回顾与展望[J].煤矿机械,2011,32(3):3-5.
[5]郎国军,苑雪涛,严海纲.薄煤层开采技术的新趋势[J].煤矿机械,2011,32(6):1-2.
[6]张武东,冯振忠,张建荣.浅析薄煤层采煤机现状及发展方向[J].矿山机械,2011,39(2):23-26.
[7]崔新霞,杜长龙.薄煤层采煤机新型截割部及其动态仿真[J].矿山机械,2011,39(11):1-4.
[8]饶俊良,胡晓辉,陈毅培.基于Solid Works的支架搬运车铲板有限元分析与改进研究[J].矿山机械,2012,40(12):36-39.
[9]刘梅云.WC24RE薄煤层无轨胶轮人车[J].煤矿机械,2010,31(5):125-126.
[10]刘梅云.WJ-4FB煤矿低矮型防爆柴油机铲运车[J].煤矿机械,2010,31(3):147-149.
[11]刘梅云.WCQ-5防爆工程车[J].江西煤炭科技,2010(1):65-67.
[12]张秋根,饶俊良.WJ-6FB防爆多功能柴油铲运机概述[J].矿山机械,2010,38(11):35-38.
[13]饶俊良,汪达勇.防爆胶轮车传动桥摆动架有限元分析[J].机械工程师,2015(9):90-91.
[14]饶俊良,汪达勇.防爆工程车刚-柔耦合虚拟样机关键技术研究[J].机械工程师,2015(2):146-147.
[15]胡晓辉,饶俊良,陈毅培.基于虚拟样机的防爆胶轮车轻量化研究[J].煤矿机械,2014,35(6):58-60.
[16]钟勋,饶俊良.基于虚拟样机的防爆铲运机前机架有限元分析研究[J].煤矿机械,2014,35(4):98-99.