- journal_title：Geophysics
- Contributor：Martin Landrø ; Helene Hafslund Veire ; Kenneth Duffaut ; Nazih Najjar
- Publisher：Society of Exploration Geophysicists
- Date：2003-
- Format：text/html
- Language：en
- Identifier：10.1190/1.1620633
- journal_abbrev：Geophysics
- issn：0016-8033
- volume：68
- issue：5
- firstpage：1592
- section：RESERVOIR GEOPHYSICS
Explicit expressions for computation of saturation and pressure-related changes from marine multicomponent time-lapse seismic data are presented. Necessary input is PP and PS stacked data for the baseline seismic survey and the repeat survey. Compared to earlier methods based on PP data only, this method is expected to be more robust since two independent measurements are used in the computation. Due to a lack of real marine multicomponent time-lapse seismic data sets, the methodology is tested on synthetic data sets, illustrating strengths and weaknesses of the proposed technique. Testing ten scenarios for various changes in pore pressure and fluid saturation, we find that it is more robust for most cases to use the proposed 4D PP/PS technique instead of a 4D PP amplitude variation with offset (AVO) technique. The fit between estimated and “real” changes in water saturation and pore pressure were good for most cases. On the average, we find that the deviation in estimated saturation changes is 8% and 0.3 MPa for the estimated pore pressure changes. For PP AVO, we find that the corresponding average errors are 9% and 1.0 MPa. In the present method, only 4D PP and PS amplitude changes are used in the calculations. It is straightforward to include use of 4D traveltime shifts in the algorithm and, if reliable time shifts can be measured, this will most likely further stabilize the presented method.