Design Paradigm Utilizing Reversible Diels–Alder Reactions to Enhance the Mechanical Properties of 3D Printed Materials

详细信息    查看全文

• 作者：Joshua R. Davidson ; Gayan A. Appuhamillage ; Christina M. Thompson ; Walter Voit ; Ronald A. Smaldone
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：July 6, 2016
• 年：2016
• 卷：8
• 期：26
• 页码：16961-16966
• 全文大小：379K
• 年卷期：0
• ISSN：1944-8252

文摘

A design paradigm is demonstrated that enables new functional 3D printed materials made by fused filament fabrication (FFF) utilizing a thermally reversible dynamic covalent Diels–Alder reaction to dramatically improve both strength and toughness via self-healing mechanisms. To achieve this, we used as a mending agent a partially cross-linked terpolymer consisting of furan-maleimide Diels–Alder (fmDA) adducts that exhibit reversibility at temperatures typically used for FFF printing. When this mending agent is blended with commercially available polylactic acid (PLA) and printed, the resulting materials demonstrate an increase in the interfilament adhesion strength along the z-axis of up to 130%, with ultimate tensile strength increasing from 10 MPa in neat PLA to 24 MPa in fmDA-enhanced PLA. Toughness in the z-axis aligned prints increases by up to 460% from 0.05 MJ/m³ for unmodified PLA to 0.28 MJ/m³ for the remendable PLA. Importantly, it is demonstrated that a thermally reversible cross-linking paradigm based on the furan-maleimide Diels–Alder (fmDA) reaction can be more broadly applied to engineer property enhancements and remending abilities to a host of other 3D printable materials with superior mechanical properties.