Perovskite Crystals for Tunable White Light Emission

详细信息    查看全文

• 作者：Sandeep Pathak ; Nobuya Sakai ; Florencia Wisnivesky Rocca Rivarola ; Samuel D. Stranks ; Jiewei Liu ; Giles E. Eperon ; Caterina Ducati ; Konrad Wojciechowski ; James T. Griffiths ; Amir Abbas Haghighirad ; Alba Pellaroque ; Richard H. Friend ; Henry J. Snaith
• 刊名：Chemistry of Materials
• 出版年：2015
• 出版时间：December 8, 2015
• 年：2015
• 卷：27
• 期：23
• 页码：8066-8075
• 全文大小：679K
• ISSN：1520-5002

文摘

A significant fraction of global electricity demand is for lighting. Enabled by the realization and development of efficient GaN blue light-emitting diodes (LEDs), phosphor-based solid-state white LEDs provide a much higher efficiency alternative to incandescent and fluorescent lighting, which are being broadly implemented. However, a key challenge for this industry is to achieve the right photometric ranges and application-specific emission spectra via cost-effective means. Here, we synthesize organic鈥搃norganic lead halide-based perovskite crystals with broad spectral tuneability. By tailoring the composition of methyl and octlyammonium cations in the colloidal synthesis, meso- to nanoscale 3D crystals (5鈥?0 nm) can be formed with enhanced photoluminescence efficiency. By increasing the octlyammonium cations content, we observe platelet formation of 2D layered perovskite sheets; however, these platelets appear to be less emissive than the 3D crystals. We further manipulate the halide composition of the perovskite crystals to achieve emission covering the entire visible spectrum. By blending perovskite crystals with different emission wavelengths in a polymer host, we demonstrate the potential to replace conventional phosphors and provide the means to replicate natural white light when excited by a blue GaN LED.