Coupling of Carbon Dioxide Stretch and Bend Vibrations Reveals Thermal Population Dynamics in an Ionic Liquid
详细信息 查看全文
- 作者：Chiara H. Giammanco ; Patrick L. Kramer ; Steven A. Yamada ; Jun Nishida ; Amr Tamimi ; Michael D. Fayer
- 刊名：Journal of Physical Chemistry B
- 出版年：2016
- 出版时间：January 28, 2016
- 年：2016
- 卷：120
- 期：3
- 页码：549-556
- 全文大小：361K
- ISSN：1520-5207
文摘
The population relaxation of carbon dioxide dissolved in the room temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EmimNTf2) was investigated using polarization-selective ultrafast infrared pump–probe spectroscopy and two-dimensional infrared (2D IR) spectroscopy. Due to the coupling of the bend with the asymmetric stretch, excitation of the asymmetric stretch of a molecule with a thermally populated bend leads to an additional peak, a hot band, which is red-shifted from the main asymmetric absorption band by the combination band shift. This hot band peak exchanges population with the main peak through the gain and loss of bend excitation quanta. The isotropic pump–probe signal originating from the unexcited bend state displays a fast, relatively small amplitude, initial growth followed by a longer time scale exponential decay. The signal is analyzed over its full time range using a kinetic model to determine both the vibrational lifetime (the final decay) and rate constant for the loss of the bend energy. This bend relaxation manifests as the fast initial growth of the stretch/no bend signal because the hot band (stretch with bend) is “over pumped” relative to the ground state equilibrium. The nonequilibrium pumping occurs because the hot band has a larger transition dipole moment than the stretch/no bend peak. The system is then prepared, utilizing an acousto-optic mid-infrared pulse shaper to cut a hole in the excitation pulse spectrum, such that the hot band is not pumped. The isotropic pump–probe signal from the stretch/no bend state is altered because the initial excited state population ratio has changed. Instead of a growth due to relaxation of bend quanta, a fast initial decay is observed because of thermal excitation of the bend. Fitting this curve gives the rate constant for thermal excitation of the bend and the lifetime, which agree with those determined in the pump–probe experiments without frequency-selective pumping.