From Concave to Convex: Capillary Bridges in Slit Pore Geometry
详细信息 查看全文
- 作者：David J. Broesch ; Joelle Frechette
- 刊名：Langmuir
- 出版年：2012
- 出版时间：November 6, 2012
- 年：2012
- 卷：28
- 期：44
- 页码：15548-15554
- 全文大小：432K
- 年卷期：v.28,no.44(November 6, 2012)
- ISSN：1520-5827
文摘
We investigate the morphological evolution of nonaxisymmetric capillary bridges in slit-pore geometry as the height of the pore and aspect ratio of the bridge are varied. The liquid bridges are formed between two hydrophobic surfaces patterned with hydrophilic strips. The aspect ratio of the capillary bridges (length/width) is varied from 2.5 to 120 by changing the separation between the surfaces, the width of the strips, or the fluid volume. As the bridge height is increased, the aspect ratio decreases and we observe a large increase in the mean curvature of the bridge. More specifically, the following counterintuitive result is observed: the mean curvature of the bridges changes sign and goes from negative (concave bridge) to positive (convex bridge) when the height is increased at constant volume. These experimental observations are in quantitative agreement with Surface Evolver simulations. Scaling shows a collapse of the data indicating that this transition in the sign of the Laplace pressure is universal for capillary bridges with high aspect ratios. Finally, we show that the morphology diagrams obtained from our 3D analysis are considerably different from those expected from a 2D analysis.