Photovoltaic Materials and Devices Based on the Alloyed Kesterite Absorber (AgxCu1-x)2ZnSnSe4

详细信息    查看全文

• 作者：Talia Gershon ; Yun Seog Lee ; Priscilla Antunez ; Ravin Mankad ; Saurabh Singh ; Doug Bishop ; Oki Gunawan ; Marinus Hopstaken and Richard Haight
• 刊名：Advanced Energy Materials
• 出版年：2016
• 出版时间：May 25, 2016
• 年：2016
• 卷：6
• 期：10
• 全文大小：1756K
• ISSN：1614-6840

文摘

The photovoltaic absorber Cu₂ZnSn(S_xSe_1–x)₄ (CZTSSe) has attracted interest in recent years due to the earth-abundance of its constituents and the realization of high performance (12.6% efficiency). The open-circuit voltage in CZTSSe devices is believed to be limited by absorber band tailing caused by the exceptionally high density of Cu/Zn antisites. By replacing Cu in CZTSSe with Ag, whose covalent radius is ≈15% larger than that of Cu and Zn, the density of I–II antisite defects is predicted to drop. The fundamental properties of the mixed Ag-Cu kesterite compound are reported as a function of the Ag/(Ag + Cu) ratio. The extent of band tailing is shown to decrease with increasing Ag. This is verified by comparing the optical band gap extrapolated from transmission data with the position of the room-temperature photoluminescence peak; these values converge for the pure-Ag compound. Additionally, the pinning of the Fermi level in CZTSSe, attributed to heavy defect compensation and band tailing, is not observed in the pure-Ag compound, offering further evidence of improved electronic structure. Finally, a device efficiency of 10.2% is reported for a device containing 10% Ag (no antireflection coating); this compares to ≈9% (avg) efficiency for the baseline pure-Cu CZTSe.