- 标准号：ASTM E1070-2011
- 发布日期：2011
- 英文题名：Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
- 英文主题词：agglomerates and related materials ; concentrates ; iron ores ; phosphorus content ; Iron ores--chemical analysis ; Phosphorus content--iron ore ; Photometry
- 标准状态：现行
- 发布单位：US-ASTM
- 国际标准分类号：73.060.10 (Iron ores)
- 载体形态：3P.;A4
- 中国标准分类号：D31
- 国别：美国材料与试验协会
This test method for the analysis of iron ore concentrates and agglomerates is primarily intended as a referee method to test for compliance with compositional specifications. It is assumed that users of this test method will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly-equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices shall be followed, such as those described in Guide E882.
The determination of this element is needed for international trade and primary iron and steel making.
1.1 This test method covers the determination of phosphorus in iron ores, concentrates, and agglomerates in the concentration range from 0.005 to 1.0 % phosphorus.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This test method has been evaluated in accordance with Practice E1601 and Guide E1763. Unless otherwise noted in the precision and bias section, the lower limit in the scope of each method specifies the lowest analyte content that may be analyzed with acceptable error (defined as a nominal 5 % risk of obtaining a 50 % or larger relative difference in results on the same test sample in two laboratories).
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.